GE Fanuc PLC I/O Expansion Unit IC609EXP101 Interface

Product Description.

The IC609EXP101 unit is an I/O Expansion Unit manufactured by GE Fanuc as part of their product line called Series One Junior.

GE Fanuc no longer manufactures or supports the IC609EXP101 I/O Expansion Unit; however, AX Control may have this product in stock.

The IC609EXP101 I/O Expansion Unit is a rectangular device with multiple ports, indicators, pushbuttons, and an on-surface display.

Like many of the devices in the Series One Junior product line, the IC609EXP101 I/O Expansion Unit has its own internal fuse and fuse protection system to avoid damage to the output circuitry.

The IC609EXP101 I/O Expansion Unit uses microminiature fast blow fuses that are rated at 2 amps.

These fuses are installed into the unit by soldering them directly into the circuit.

Although the IC609EXP101 I/O Expansion Unit has its own built-in fuses, GE Fanuc recommends that external fuses be supplied with the output circuitry.

Units in the Series One Junior catalogue are supplied with built-in indicators and other aids to assist in troubleshooting.

There is also a main diagnostic tool that can be attached to the IC609EXP101 I/O Expansion Unit that acts as a programmer.

This programmer is a key tool for checking the status of the Series One Junior unit, so it is important to have it with you during troubleshooting.

The total weight of the IC609EXP101 I/O Expansion Unit is approximately 3.75 lbs. or 1.70 kg.

Frequently Asked Questions about the IC609EXP101

What are the functions of the IC609EXP101?

The IC609EXP101 is an expansion unit in the One Jr. series.

When must I install an expansion unit?

IC609EXP101 is required if the Series One Jr. system has more than 24 I/O points.

How many points are added to the system when the IC609EXP101 is added?

When IC609EXP101 is added, up to 72 additional I/O points are added.