GE IC200MDL940 16-Point Relay Output Module

DESCRIPTION: The IC200MDL940 is a 16-point relay output module for the VersaMax I/O family, formerly manufactured by GE Intelligent Platforms and now part of Emerson Automation.

The module has sixteen (16) individually isolated normally open (N.O.) or type A contacts rated from 0 to 125VDC,

5/24/125VDC nominal output voltage and 0 to 265VAC (47 to 63Hz), 120/240VAC nominal output voltage with output contacts rated at 2.0 amps.

About the IC200MDL940

The IC200MDL940 is a relay output module that is part of Emerson Automation's VersaMax I/O platform, formerly offered by GE Fanuc.

The module is equipped with sixteen (16) independently isolated Type A relay output contacts rated from 0 to 125VDC,

5/24/125VDC nominal output voltage and 0 to 265VAC (47 to 63Hz), 120/240VAC nominal output voltage with output contacts rated at 2.0 amps.

With built-in channel-to-channel isolation, each contact output can be connected to a different voltage source to power the appropriate electrical device connected to the output channel.

The module's embedded relay is a fixed coil, moving armature type with contacts made of silver alloy.

The module can be used to energize output devices such as relay coils, solenoid-driven instruments, indicator lights, and other instruments.

It has no snubber circuits or internal protective fuses, however, the user can install external protection accordingly.

The module does not display output leakage currents because the contact outputs are open-circuit when not activated.

In addition, each output channel has a response time of 10 ms and is dedicated to open-to-closed and proximity-to-open contact switching.

The maximum switching frequency of each output contact is 20 cycles per minute when used with inductive loads. Each output channel is equipped with a separate channel status indicator to characterize the operating status of each channel.

This IC200MDL940 has a maximum backplane current consumption of 490mA and requires a rating of 0 to 125VDC,

5/24/125VDC and 0 to 265VAC (47 to 63Hz) nominal external power supplies with a nominal supply voltage of 120/240VAC.

The IC200MDL940 module is a VersaMax PLC relay output module manufactured by GE Fanuc. It is equipped with 16 output points.

The module has A-type contact outputs and is compatible for use in Class 1 Division 2 rated environments over a temperature range of 0 to 60 degrees Celsius.

It complies with different environmental and industrial standards, including CE and cULus standards. These individual points are isolated from each other.

The IC200MDL940 module is rated for 24 volts DC and 120 to 240 volts AC. It is rated at 2 amps.

The front of the module has a lock/unlock lever. Each point has an LED to indicate activity on that point.

When the CPU logic bit is set to 1. the contacts in the module are closed.

The GE Fanuc VersaMax IC200MDL940 module is powered through the backplane. Loads on the module should be powered through an external power supply.

An additional CPU is required to handle the logic operations of the module. The logic and frame ground isolation ratings for the user input module are 250 volts AC continuous, 1500 volts AC for time periods up to 60 seconds.

The output voltage drop is 0.3 V maximum. The IC200MDL940 module has a load current of 10 mA per point.

The relay used in the module is a fixed coil relay with a movable arm. The contact type is made of high quality silver alloy.

IC200MDL940 Frequently Asked Questions

1. What contact forms can I use with the IC200MDL940?

The IC200MDL940 has either Type A or Normally Open (N.O.) contacts.

2. What is the current rating of the module output contacts?

The maximum current rating of each contact output is 2.0 amps.

3. What is the channel response time of the IC200MDL940?

The maximum channel response time of the IC200MDL940 is 10 ms.

Technical description of the IC200MDL940

The GE Fanuc IC200MDL940 output module is a Versamax PLC relay output module. It is designed to operate in a Class 1 Division 2 industrial environment.