GE Fanuc IC200MDL744 Discrete Output Module

The IC200MDL744 discrete output module is a 5. 12. or 24 volt DC rated negative logic output module manufactured by GE Fanuc.

It has 32 groups of 2 outputs with output voltages of 4.75 to 5.25 volts DC in TTL mode and 30.12 to 24 volts DC in 10/2 volt DC mode.

It has 32 groups of 2 outputs with output voltages of 4.75 to 5.25 volts DC in TTL mode and 30.12 to 24 volts DC in 10/2 volts DC mode, and a backplane current draw of 5 milliamps.

About the IC200MDL744

The IC200MDL744 discrete output module is a GE Fanuc 24-volt DC positive/negative logic output module with 32 discrete outputs divided into 2 groups.

It provides 16 discrete outputs as well as DC+ and DC terminals for each bank.The IC200MDL744 Discrete Output Module has current-flooded outputs.

The IC200MDL744 discrete output module has current sinking outputs that connect the load to the negative side of the DC power supply. These negative outputs receive current from the load. It also provides backplane-powered status LEDs.

Backplane current consumption** is rated at 140 mA at 5 V. This module is not protected. This module does not come with an internal fuse for protection.

Each output channel has a status LED to indicate the status of the output.

The IC200MDL744 discrete output module provides a green "FLD PWR" LED to indicate whether field power is applied to the module.

The IC200MDL744 discrete output module provides a green "FLD PWR" indicator to indicate whether field power is applied to the module and an "OK" LED to indicate the presence of backplane power. It also has a 0.2 ms turn-on response time and a 1 ms turn-off response time.

When inductive loads are connected to the outputs, the use of an external suppression circuit is recommended. The thermal derating of the module depends on several factors.

such as ambient temperature, voltage level, and orientation of the module. It has 250 volts AC, user input to logic,

user input to logic, user input to frame, and group to group isolation voltages. It does not have point-to-point isolation.

The IC200MDL744 Discrete Output Module requires a NIU or CPU in the Versamax PLC to perform intelligent processing for industrial applications.

Features

Powerful, Reliable Performance

VersaMax controllers provide powerful, reliable operation. These versatile controllers are designed to minimise cost, are easy to use and support, and offer a wide range of I/O expansion modules and communication options.

Versamax Modularity Provides Exceptional Versatility

VersaMax modularity is control and IO that can be snapped together to provide compact nodes with a smaller footprint than typical control/IO combinations.

Versamax Micro Delivers High Performance in a Small Form Factor

The Micro Series VersaMax controllers offer superior functionality in a compact package. Their modular design provides the functionality and flexibility to meet your application needs.

Large amounts of memory with fast cycle times, powerful instruction sets, and expanded programming options. Programming and configuration is simple and intuitive using Proficy Machine Edition software.

Versamax Micro Plus Increases Productivity

To further increase productivity, the VersaMax Micro Plus controller features more memory, high-precision motion, and an advanced instruction set.

Versamax Nano Delivers High Speed in Tight Spaces

The VersaMax Nano controller combines the benefits of the VersaMax Micro controller with a smaller form factor.

The VersaMax Nano is ideally suited for high-volume applications where cost and fast processor speed are critical. With its all-in-one construction, installation is simple and it fits in the palm of your hand.