GE Fanuc IC200MDL636 48V DC Positive and Negative Logic Input Module

The IC200MDL636 is a 48 VDC positive and negative logic input module with 32 points manufactured by GE Fanuc for the VersaMax family.

The IC200MDL636 provides four groups of eight discrete inputs. The inputs in each group can be either positive logic inputs or negative logic inputs.

Positive input logic receives current from the input device and returns current to the common, while negative logic inputs receive the same current from the common and return it to the input device.

The input device is connected between the input terminal and the common terminal.

The number of points that can be turned on at the same time depends on a variety of factors, including external voltage, module and DIN rail orientation, and ambient temperature.

The IC200MDL636 is powered by the baseboard. Intelligent processes are executed by the CPU or NIU. The module provides 32-bit discrete input data.

The IC200MDL636 module has individual green LEDs that indicate the on/off status of each input.

Backplane power must be available for the LEDs to execute. When backplane power is recognised, the green OK LED will indicate ON.

The basic input on/off response time Model IC200MDL636 is 0.5ms modulo.

However, some applications may require additional filtering to handle noise spikes or switch bounce situations.

About the IC200MDL636

Produced by GE Fanuc in the Versamax family, the IC200MDL636 input module is a high-capacity input module with 32 input points.

The IC200MDL636 32-point input module derives power from the backplane of the Versamax PLC to which it belongs.

The green LED "OK" on the module glows when backplane power is applied to the module.The IC200MDL636 input module provides 32-bit discrete input data.

and can accept intelligent processing by the PLC CPU or NIU. 32 inputs are divided into 4 groups of 8. depending on the application.

The 32 inputs are divided into 4 groups of 8. each of which can be positive or negative logic inputs, depending on the application. There is no point-to-point isolation.

There is no point-to-point isolation, but each group of 8 inputs is isolated from each other by 1 minute of 1500 volts AC and 250 volts AC continuously.

The GE Fanuc Versamax IC200MDL636 Input Module is rated for turn-on voltages from 34 to 60 volts DC and turn-off voltages from 0 to 10 volts DC.

No external power supply is required as the input module is powered by the PLC backplane. Its backplane power consumption is rated at 5 volts output and 140 mA maximum current.

The IC200MDL636 input module has a user settable filter time setting of 1 ms by default, but can be set to 0 ms or up to 7 ms by the user.

The module is rated for input voltages from 0 to 60 volts DC, while the nominal rating is 48 volts DC.