GE Fanuc IC200CPU001 Configurable Central Processing Unit (CPU) Module

The IC200CPU001 is a central processing unit (CPU). It is part of the VersaMax platform, currently part of Emerson Automation.

It was previously manufactured by GE Intelligent Platforms (GE IP). The CPU is a compact controller that supports processing 2048 discrete inputs and 2048 discrete outputs.

Configurable memory is 34K bytes for user programming, registers and analogue input and output word processing.

It has a Boolean execution speed of 1.8 ms/K and typically has built-in communication interfaces such as RS232 and RS485 ports that are compatible with SNP slaves, RTU slaves and serial I/O.

About the IC200CPU001

The IC200CPU001 is Emerson Automation's VersaMax series of compact controllers, formerly known as the GE Intelligent Platform (GE IP).

It is a DIN-rail or panel-mounted central processing unit (CPU) module capable of handling up to 2048 discrete inputs

2048 discrete outputs and 34 KB of memory that can be allocated to user programs, analogue input and analogue output data, and internal registers.

The CPU is also equipped with 1024 points of discrete internal bits, 256 points of discrete temporary bits and 1280 points of global discrete bits.

The IC200CPU001 has a typical Boolean execution speed of 1.8 ms / K. It supports floating-point mathematical calculations and data processing, override functions

and is equipped with a battery-backed real-time clock (RTC) with an accuracy of 100 ppm (0.01%) or +/- 9 seconds/day.

for internal timer and counter commands, 23 ppm (.0023%) or +/- 2 sec/day @ 30C; and

100 ppm ((0.01%) or +/- 9 sec/day @ full temperature range for logic scheduling or scheduling-based logic sequences.

The available integrated communication ports for the IC200CPU001 are one (1) RS232 and one (1) RS485 communication interface.

These interfaces support a variety of industrial communication protocols such as SNP slaves, RTU slaves, and serial I/O and can be used to implement distributed I/O architectures,

Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA) systems, and other applicable and compatible partner devices.

These CPU modules are configured using CIMPLICITY Machine Edition Logic Developer, VersaPro or Control Programmer.

The IC200CPU001 CPU is a user-configurable CPU manufactured by GE Fanuc with 2 serial ports and 34 KB of configurable memory.

The CPU uses non-volatile memory to store programs. It supports programming in ladder diagrams and instruction lists.

It has 1024 points for discrete internal bits and 256 points for temporary bits.The global discrete bits of the CPU consist of 1280 points.

The Boolean execution speed of the CPU is 1.8 ms/K. The IC200CPU001 CPU supports floating point and overclocking.

The CPU is equipped with built-in RS-232 and RS-485 ports. For internal communication, the CPU uses SNP slave and serial I/O protocols.

The CPU's memory is battery-backed and it has a real-time clock. The clock adds time stamps to critical time events during operation.

The real-time clock accuracy is 100 ppm over the entire temperature range.

The GE Fanuc Versamax IC200CPU001 CPU can be easily mounted using a DIN rail with power supply.

The IC200CPU001 CPU is designed with 32 modbus registers, enhanced PID function blocks, and higher communication output than other CPUs.

The CPU's backplane current consumption is rated at 140 mA (5 volts) and 100 mA (3.3 volts).

There are LEDs on the front for different system events.The serial port on the IC200CPU001 CPU is user configurable using software.

The port can automatically switch between RTU and SNP slave modes when required.The CPU run/stop mode switch is located on the front behind the module door. It is used to start or stop the CPU.

IC200CPU001 Frequently Asked Questions

1. How many discrete I/Os can the IC200CPU001* accommodate?

The IC200CPU001 supports up to 2048 discrete inputs and 2048 discrete outputs.

2. What programming languages does the IC200CPU001 support?

The IC200CPU001 can be downloaded from a ladder diagram or from a user programme in the instruction list.

3. Does the IC200CPU001 support floating point data processing?