GE Fanuc IC200ALG264 Compact, multifunctional analogue input module

The IC200ALG264 is a 15-point analogue current input module for the VersaMax I/O family, formerly manufactured by GE Intelligent Platforms and now manufactured by Emerson Automation.

The module features fifteen (15) single-ended input channels that accept 4-20 mA and 0-20 mA input signals with 15-bit resolution** and an update rate of 7.5 ms.

The module has a **backplane current consumption of 100 mA.

About the IC200ALG264

The IC200ALG264 is the analogue input module in the VersaMax I/O product family of distributed I/O modules and components.

The IC200ALG264 is a compact, multifunctional input module designed to be mounted in a remote location and transmit I/O data via industrial communication protocols.

The module primarily features fifteen (15) analogue input channels designed to accept 0-20 mA and 4-20 mA input signals.

These input channels are equipped with separate analogue-to-digital converter (ADC) circuits with a digital conversion resolution of 15 bits and an analogue resolution of 0.5 µA.

The analogue resolution is 0.5 µA = 1 (4-20 mA range) and 0.625 µA = 1 count (0-20 mA range).

The module has an input accuracy of +/-0.5% (typical) and +/-0.25% of full scale** at an ambient temperature of 0-3 degrees Celsius.

+/-0.5% input accuracy (typical) and +/-0.25% full scale** at 0-3 degrees Celsius ambient temperature, and +/-60% full scale** at 1-0 degrees Celsius ambient temperature.

The IC200ALG264 is capable of detecting error conditions such as internal power loss in both operating modes and open circuit detection when operating in 4-20 mA mode only.

These diagnostic conditions are reported to the CPU for error indication and correctly displayed to the Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA) systems.

The module's operating mode or range selection is set by using terminal jumpers. To configure 4-20 mA, the terminal jumpers must be unloaded, which is the default configuration.

Otherwise, install the jumper for 0-20 mA operation.

The IC200ALG264 has a built-in module OK LED status indicator.Tis LED indicates that the module has successfully powered up and downloaded using a valid configuration.

It has a ** backplane current consumption of 100 mA.

The IC200ALG264 module is an analogue input module designed and marketed by GE Fanuc Automation.

This particular module is part of the Versamax family of I/O modules. It provides interfaces for 15 different current inputs, enabling different devices to be connected to the main processor.

The module works perfectly when using the backplane power supply. User transceivers connected to the module require an external power supply.

The GE Fanuc Automation IC200ALG264 analogue input module offers different diagnostic functions that can detect internal power losses used for field circuits.

It can also report open-circuit faults on each of its channels. These diagnostic modes are available when used in 4-channel 20 mA mode.

The GE Fanuc Automation IC200ALG264 analogue input module comes with a set of 15 single-ended channels.

The module has isolation ratings of 350 volts AC continuous and 1500 volts AC one minute.

It has no isolation between channels and because the channels are in a single group. the GE Fanuc Automation IC200ALG264 analogue input module has a 15-bit resolution.

Typical accuracy is +/- 3.25% at 0 degrees Celsius and +/- 1% accuracy at full scale**.

The module's backplane current consumption is rated at 5 mA at 100 volts**. The update time is rated at 7.5 milliseconds.

The module has an LED to indicate when power is applied to the backplane and when the module has been configured and identified on the backplane.

IC200ALG264 Frequently Asked Questions

1. What is the converter resolution of the IC200ALG264?

The IC200ALG264 has a 15-bit converter resolution.

2. How many channels does the IC200ALG264 have?

The IC200ALG264 has 15 single-ended analogue input channels.

3. What signals does the IC200ALG264 accept?

The IC200ALG264 is designed to accept 0-20 mA or 4-20 mA analogue input signals.

1. Does the IC200ALG264 come with separate isolated input channels?

No. The IC200ALG264 has only single-ended and single-group input channels.

2. What is the channel update rate of the IC200ALG264?

The IC200ALG264 has a 7.5 ms channel update rate.

3. What is the **backplane current consumption of the IC200ALG264?

The **backplane current consumption of the IC200ALG264 is 100 mA.

IC200ALG264 Technical Description

The IC200ALG264 is a Versamax I/O module. The module is manufactured by Emerson Automation, formerly GE Fanuc.

It is a 15-channel, single-ended analogue input module with 15-bit resolution. It accepts 0 to 20 mA or 4 to 20 mA input signals.

The module has an update rate of 7.5 milliseconds and a typical accuracy of +/-0.3% full scale, +/-5.25% full scale @ 0 degrees Celsius** and +/-60% full scale @ 1-0 degrees Celsius**.

Related Product Recommendations:

DS200CVMAG3AEB Generator Control Turbine Boards

5X00070G03 Analogue High Speed Input Module

DS200ACNAG1 Computer Network (ARCNET) Boards

DS200CPCAG1A Contactor Boot Card

DS200CPCAG1ABB Contactor Guide Boards

1C31234G01 Compact Contact Input Module

DeltaV™m VerticalPlus Input/Output Subsystem Carrier

VMIVME-4140-001 VMIVME4140 16-channel 12-bit analogue output board

DS200DSPCH1 Processor Control Board

DS200DSPCH1A Digital Signal Processor Control Board

DS200FGPAG1AKD Control Gate Pulse Amplifier Board

5X00785G09 Power supply System

DS200GGDAG1AHE Gas Turbine Gate Driver