GE Mark V-Series DS200CVMAG1AEB Generator Control Turbine Boards

About the DS200CVMAG1AEB

As mentioned above, this DS200CVMAG1AEB printed circuit board product was originally manufactured for placement in General Electric's Mark V family of turbine control systems.

As you may have guessed, this DS200CVMAG1AEB product belongs to the Mark V family in the popular Steam,

wind and gas turbine automatic drive system components with specific applications in control and management systems, and was considered a legacy series for General Electric as it was eventually discontinued a few years after its initial release.

This larger Mark V series of DS200CVMAG1AEB Printed Circuit Boards or PCBs for short, while existing as a legacy series, is

but is also part of General Electric's recently released line of products utilising their patented Speedtronic control system technology.

While this DS200CVMAG1AEB PCB can be functionally described as a generator control turbine board, the original PCBs developed with this function were not.

However, the Mark V series products originally developed with this functionality were missing all three parent PCBs of the DS200CVMAG1AEB PCB three important product revisions of the DS200CVMAG1 parent PCB.

Hardware Tips and Specifications

The GE Generator Control Turbine Board DS200CVMAG1AEB contains two 16-pin connectors and one 2-pin connector. The board is also equipped with 6 test points.

The GE Generator Control Turbo Board DS200CVMAG1AEB can be damaged by static electricity, so care must be taken when handling and installing the board.

When you open the box in which the board was shipped, you will notice that the board is packaged in a sealed plastic bag.

When the bag is sealed, it serves multiple purposes. It protects the board from dust, dirt, and other contaminants, as well as water or other liquids that may spill onto the board.

Firstly, the bag prevents static electricity from damaging the board. Consider the static buildup that can occur when you walk around with your board.

The air around you can cause static electricity to build up on your body and the board. Touching surfaces and walking on certain surfaces can also cause static buildup.

With this in mind, it is best to avoid carrying your board unless you are installing it. Keep in mind that the dry air you encounter in cold weather can lead to greater static buildup.

The GE Generator Control Turbine Board DS200CVMAG1AEB is shipped to you with a wrist strap that allows static electricity to drain away from your body and the board.

One end of the wrist strap wraps around your wrist and the other end is used to clip onto a metal surface, such as the legs of a workbench.

Whilst the static sensitivity of such DS200CVMAG1AEB printed circuit boards and the specification of installation procedures are important.

However, their location here is more reminiscent of the lack of online original instructional manual material for research purposes for this DS200CVMAG1AEB product.

In view of this apparent deficiency, the DS200CVMAG1AEB functional product numbers themselves have been given a new light in the Mark V series, presenting many of the important DS200CVMAG1AEB hardware specifications in the form of function blocks.

Starting with the Dual Function DS200 Series label, which commissions the original manufacturing location of this DS200CVMAG1AEB PCB and its normal Mark V Series assembly.

Some other relevant DS200CVMAG1AEB details revealed through the DS200CVMAG1AEB number itself include the following DS200CVMAG1AEB PCB:

. the CVMA functional product abbreviation .

. Normal PCB coating style .

. Group I Mark V Series Product Grouping .

.A Level Primary Functional Revisions

.E Level 2 Functional Revisions

.B Level Drawing Configuration Revisions

Frequently Asked Questions about DS200CVMAG1AEB

How do I control the DS200CVMAG1AEB?

Control of the DS200CVMAG1AEB is accomplished through the Start, Accelerate, Speed, Temperature, Shutdown, and Manual control functions on the DS200CVMAG1AEB.

What are the dimensions of the DS200CVMAG1AEB?

The DS200CVMAG1AEB is 11 inches wide.The DS200CVMAG1AEB is 4 inches high.

How many relays are on the DS200CVMAG1AEB?