Eaton FCS-9000 range Junction boxes

The FCS-9000 range of enclosures are manufactured from polished

316 stainless steel to provide the highest levels of corrosion

resistance for the harshest process environments.

The FCS-96xx Process JBs are suitable for Zone 2 and Zone 1

intrinsically safe (Ex i) and increased safety applications.

The fieldbus junction boxes are available pre-drilled for one

segment: having trunk-in, trunk-out and 4 spur connections; or a

trunk-in and 8 or 12 spur connections; or two segments having a

trunk-in and 24 spur connections. Two-pair multicore trunk cable

may be used when only a single trunk gland is available.

For temperature multiplexer applications, junction boxes are

available for a single MTL831C with a data highway in and 16

sensor connections and for 2 MTL831C units with a data highway

in and 32 sensor connections.

The wide choice of glands, including stainless steel and nickel

plated brass, enables a high quality seal with standard or wire

armoured cables.

The box incorporates a rain channel that prevents standing water

from damaging the one-piece seal; diverting it away from the

contents when the door is opened. A 10mm earth stud and a

breather are also included as standard.

An adhesive backed, Traffolyte tag label is supplied loose or can be

engraved with the tag number and fitted, if details are supplied

when ordering.

SPECIFICATION

GENERAL

Materials

Electrochemically polished 316 Stainless Steel

Silicone gasket

DIN rail

FCS-9604. FCS-9608. FCS-9612.

FCS-9616. FCS-9642: - one (1) DIN rail

FCS-9624. FCS-9362: - two (2) DIN rails

DIN rail to EN 50022 35 x 7.5 ‘T’ section, mounted vertically

Each rail fitted with two end stops

Breather plug

Provided

External earth connection

M10 threaded stud

Tag label

Traffolyte, adhesive backed - white background - black text

Other

Hinged lid

ENVIRONMENTAL

Operating Temperature –40°C to +70°C

Storage Temperature–40°C to +80°C

Relative Humidity % RH (non-condensing)

5 to 95%

IP rating

IP66 to EN 60529

Impact resistance

7 Nm to IEC 60079-7

Location of Process JB

Safe area, Zone 2. IIC T4 hazardous area or Zone 1. IIC T4

hazardous area for intrinsically safe fieldbus segment.