Power the Loop
The Trex communicator includes built-in functionality to power
a device. Simply connect the communicator to an instrument
to power it. Technicians no longer waste time rounding up a
power supply or confirming adequate loop resistance before
testing, speeding configuration on the bench.
Power the loop functionality allows device configuration in the
field on new projects—even before power and I/O infrastructure
are in place. Transmitter configuration no longer needs to be
the last step of new projects. Configure transmitters before the
host system, wiring, piping, and other project elements arrive,
keeping transmitter configuration from being a critical path
item, allowing more flexibility in new project scheduling and
leading to faster startups.
Powering devices from the communicator allows you to isolate
the device from the rest of the system, helping you identify
installation problems like power supply, wiring, I/O card,
and configuration issues.
Auto Sync
The Auto Sync technology in AMS Trex helps maintain data
integrity in your AMS Device Manager database without any
technician intervention. Every change made in the field is
automatically recorded and time-stamped.
Changes are updated in real-time if Wi-Fi connection is enabled
and a technician is in a hot spot. Or changes are cached on
the Trex communicator and applied to the database when the
communicator detects a Wi-Fi signal or USB cable connection.
The Trex communicator logs and timestamps changes as they
occur, delivering an accurate audit trail of device changes to
the AMS Device Manager database.
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved