EPRO MMS 6210 Dual Channel Shaft Displacement Monitor

Part of the MMS 6000 system

Replaceable during operation;

Can be used independently with redundant power inputs

Extended self-test functions;

Built-in sensor self-test device;

Password-protected operating level .

. Compatible with the eddy current sensor system PR 6422 / ... with CON/... ... with eddy current sensor systems PR 6422 /... . to PR 6426 /... .

. Reading out of all measurement data via RS 232 /RS 485

. Built-in linearisation function

. RS 485 interface for communication with epro's analysis and diagnostic system MMS 6850 .

The two-channel shaft displacement measuring module MMS 6210 measures the displacement of shafts.

For example: axial position of shaft ends, rectangular or conical discs in tandem configurations, differential and thermal expansion as well as radial position and bending of shafts.

It uses the output of an eddy current displacement sensor. It is recommended that these measurements be used in conjunction with other measurements to establish a turbomachinery protection system, to and provide the inputs required for analysis and diagnostic systems, as well as the inputs required for analysis and diagnostic systems.

These systems include: analysis and diagnostic systems, fieldbus systems, distributed control systems, plant/host computers, and networks.

such as WAN/LAN, Ethernet. Such systems are also suitable for establishing systems

to improve performance and efficiency, operational safety and extend the life of steam-gas-hydro turbines as well as compressors, fans, centrifuges and other turbomachinery.

Dimensions

PCB/EURO card format according to

DIN 41494 (100 x 160 mm)

Width: 30.0 mm (6 TE)

Height: 128.4 mm (3 HE)

Length: 160.0 mm

Net weight: approx. 320 g 320 g

Gross weight: approx. 450 g 450 g

Including standard export packaging

Packaging volume: approx. 2.5 cubic metres 2.5 cubic metres

Space Required

14 modules per 19’ rack (28 channels)