The ELM310x EtherCAT Terminals are designed for flexible current
measurement in the range from -20 to +20 mA. They offer
selectable measuring ranges of -20/0/4 to ±20 mA as well as current
measurement according to NAMUR NE43.
The measuring range is selected in the CoE, as are the other setting
options such as the filter parameters. Irrespective of the signal
configuration, all ELM modules have the same technological properties.

The ELM310x modules for current measurement offer a maximum
sampling rate of 10.000 or 20.000 samples per second.
The 2-pin plug (push-in) can be removed for maintenance purposes
without releasing the individual wires.
The individual Beckhoff factory calibration certificate can be downloaded
via Beckhoff Service.
here for each device. Recalibration (ZS9001) is possible
Extensive documentation is available from Beckhoff sales, support or
measurement@beckhoff.com.
This ELM3xxx series measurement terminal enables efficient
implementation of complex system-integrated data acquisition systems
(DAQ) that place high demands on measurement accuracy and time
synchronization.
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2026 Cld , All Rights Reserved K-JIANG All rights reserved