Beckhoff ELM3102-0030 | EtherCAT Terminal, 2-channel analog input, current

The ELM310x EtherCAT Terminals are designed for flexible current

measurement ranging from -20 to +20 mA. They offer selectable

measuring ranges from -20/0/4 to ±20 mA, as well as current

measurement in accordance with NAMUR NE43.

The measuring range can be selected in the CoE, as well as the

other setting options, such as the filter parameters. Regardless of

the signal layout, all ELM modules offer the same technological

features, with the ELM310x for current measurement providing a

maximum sampling rate of 10.000 or 20.000 samples per second.

The 2-pin connector (push-in) can be removed for maintenance

purposes without disconnecting the individual wires.

The individual calibration certificate for each device, in accordance

with ISO 17025 or DAkkS, depending on the device variant, can

be downloaded here. These calibration certificates are issued for

Beckhoff by an accredited service provider. Recalibration on request.

Extensive documentation is available from Beckhoff sales, support or

measurement@beckhoff.com.

This ELM3xxx series measurement terminal enables efficient

implementation of complex system-integrated data acquisition systems

(DAQ) that place high demands on measurement accuracy and time

synchronization.