Beckhoff EL2838 | EtherCAT Terminal, 8-channel digital output

The EL2838 digital output terminal connects the binary control signals

of the automation device to the actuators at process level with electrical

isolation. The EtherCAT Terminal contains eight channels, which indicate

their signal status by means of LEDs.

The integrated diagnostics can be evaluated in the controller and are

indicated by the LEDs. A diagnostic bit is set for the affected channel if

there is an overload. The diagnostics serve to simplify the maintenance

of the application. The power contacts are looped through.

The outputs of the EL2838 are supplied via the 24 V power contact.

The outputs are electrically isolated from the fieldbus side.

Special features:

• connection of different load types possible (resistive, inductive, lamp load).

• max. output current of 2 A per channel (∑ 10 A)

• short-circuit proof outputs and reverse polarity protection

• integrated diagnostic option overload

• tool-free connection due to direct plug-in technology for solid conductors