The EL2502-0010 output terminal modulates the pulse width of a binary
signal, and outputs it electrically isolated from the E-bus.
The mark/space ratio is preset by a 16-bit value from the automation device.
The output stage is protected against overload and
short-circuit. The EtherCAT Terminal contains two channels whose signal
state is indicated by LEDs. The LEDs are driven in time with
the outputs, and show the duty factor by their brightness.

The EL2502-0010 supports EtherCAT distributed clock timestamps in
order to influence switching on, off and over of a PWM signal with
microsecond precision.
Special features:
• PWM output with push-pull output stage
• max. output current 0.5 A per channel
• separate frequency adjustable for each channel
• synchronized operation through distributed clocks XFC technology possible
• support of XFC technology timestamp
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved