Beckhoff EK1814 | EtherCAT Coupler with integrated digital inputs/outputs

The EK1814 EtherCAT Coupler is the link between the EtherCAT protocol at fieldbus level and the EtherCAT Terminals. In addition,

four digital inputs and four digital outputs are integrated. The resulting design is particularly suitable for applications with a small

number of I/Os. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A station

consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in the

process image.

Special features:

• Connection technology: 2 x RJ45 socket

• Connection lengths: up to 100 m

• 4 digital inputs and 4 digital outputs

• Number of EtherCAT Terminals in the overall system: up to 65535

The EK1814 has two RJ45 sockets. The upper Ethernet interface is used to connect the coupler to the network; the lower socket

serves for the optional connection of further EtherCAT devices in the same segment. In addition, an EtherCAT junction or an

EtherCAT extension can be used for the extension or for setting up a line or star topology.

The system and field supply, each 24 V DC, is provided directly at the coupler. The attached EtherCAT Terminals are supplied with

the current required for communication from the supplied system voltage. The coupler can supply a maximum of 5 V and 1 A. If

higher current is required, power feed terminals such as the EL9410 have to be integrated. The field supply is forwarded to the

individual I/O components via the power contacts with up to 10 A.