Select I/O is an Ethernet networked, single channel granular I/O
system for the ABB Ability™ System 800xA automation platform.
Select I/O helps decouple project tasks, minimizes the impact of
late changes, and supports standardization of I/O cabinetry
ensuring automation projects are delivered on time and under
budget. A Signal Conditioning Module (SCM) performs the
necessary signal conditioning and powering of the connected field
device for one I/O channel.
The DIS801 is a Digital Input 24 V Signal Conditioning Module
supporting 2/3/4-wire devices with Sequence of Events (SOE).
Features and benefits
• Digital input for 2-wire, 3-wire and externally powered 4-wire field devices
• Can be used in hazardous areas
• Field device power output current limited to 35 mA
• Channel to channel galvanic isolation
• Configurable software signal filter 0...100 ms
• Protected against wrong wiring
• Diagnostics:
– Loop supervision (open circuit and short circuit)
– Communication supervision
– Internal power supervision
• Sequence of Events (SoE)
• DIS801 supports both Normally Open (NO) and Normally Closed (NC) 24 V loops
• Single loop granularity - each SCM handles a single channel
• Supports hot swap
• Mechanical locking slider which turns off field device power and/or output before removal
• Field disconnect function which can galvanically separate the field loop wiring from the SCM during
commissioning and maintenance
• All SCMs have electronic current limitation
• Mechanical keying to prevent insertion of wrong module type after commissioning
• 24V DC powered through Modulebus
• Configurable through parameters
• LED indicators on the SCM indicate the operational state of the module
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved