DEIF SGC 410 Single Genset Controller

OVERVIEW

The SGC 410 controller is a modern island genset controller with a user-friendly HMI and full graphic LCD.

It includes voltage and frequency measurement of the genset as well as electrical load measurement (True RMS).

Configurable analog and digital inputs/outputs are provided for various functions.

Remote communication is available via RS-485 Modbus and CAN ports.

The genset can be started and stopped remotely using the remote start/stop function.

Deep sleep mode is a useful feature that extends battery life by suspending the normal function of the controller when the genset is shut down.

Monitor engine safety, electrical load, on-site standby battery voltage, and shelter temperature (to reduce fuel consumption).

Configure parameters from a PC using the DEIF Smart Connect utility software. Connects to the PC via the controller's USB Type B port.

Main Functions

- Automatic, manual and remote start/stop modes with night limit option

- 17 inputs, configurable

5 resistive inputs

2 analog I/V

1 differential

9 digital

- 7 digital outputs, configurable

- Modbus connection via RS-485

- Configurable manually from PC via controller front buttons or using DEIF Smart Connect utility software

- Backlit full graphic LCD with power saving feature for extended battery life

- Supports battery charging alternator I/O interface

- Supports automatic modes (on-site battery monitoring, remote start/stop, auto-run, and cycling) and manual modes of operation

- Magnetic pickup unit (MPU) interface for engine RPM measurement

- Auto run mode (2 events) to start and stop the genset at pre-set times

- Monitoring of the generator's single/three-phase voltage, frequency, load current and power factor

- Monitoring of engine safety parameters such as lubricant pressure, engine temperature, oil level, etc.

- Monitor telecom site backup battery level and shelter temperature to minimize engine operation and fuel consumption at telecom tower sites

- Controls digital outputs such as start relays, fuel relays, alarm horns, etc.

- Event log of 100 events with real-time clock (RTC) stamps and engine runtime information

- Engine start, engine trip, engine run hours, genset kWh, kVA, kWh counters

- CANbus for engine communication with support for Stage 5/Level 4 final version

SGC 410 Technical Specifications

Power supply

- Rated voltage: 12/24 VDC

- Operating range: 8 to 32 VDC

- Transient power supply, ISO 7637-2 compliant

Operating conditions

- Operation: -20 to 65 °C

- Storage: -30 to 75 °C

- Conforms to IEC 60068-2-1. 2

Environmental

- Vibration: 2 G in X, Y, and Z axes per IEC 60068-2-6

- Shock: 15 g, 11 ms per IEC 60068-2-27

- Humidity: 0 to 95 % RH per IEC 60068-2-78

- Enclosure rating Front gasketed IP65 per IEC 60529

- EMI/EMC: IEC 61000-6-2. 4

Approvals

- CE marking:

Complies with the EU Low Voltage Directive: EN 61010-1 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements.

Compliance with EU EMC Directive EN 61000-6-2. 4