Johnson Controls CV series features

CV series features

In addition to the features listed in Features and benefits,

CV series equipment controllers provide the following

benefits:

An integrated damper actuator and digital Differential

Pressure Transducer (DPT) sensor

Reduces installation time

Fast response actuator

Drives the damper from full open to full closed (90°) in 60

seconds to reduce commissioning time

Preloaded, selectable applications

The CV series VAV box controller is shipped with a

factory-installed library of the most popular VAV box

control applications. You can make this controller fully

operational by using the MAP to select the appropriate

VAV box application, thereby, saving field technicians'

time by eliminating the provisioning workflow.

Optional integrated feedback potentiometer

Reassures users and field technicians of the VAV box

damper’s actual position and enables them to easily

confirm and troubleshoot VAV controller operations,

confirm actuator is at the desired position and track

damper position.

CV installation

Field mounting the CV series controllers is

straightforward. These controllers require minimal wiring

and are mounted to the VAV box using a single sheet

metal screw and a single set screw to lock the actuator

to the damper shaft. The set screw has a self-locking cup

point end to resist loosening due to vibration.

The actuator coupling is serrated, providing additional

damper shaft grip and minimizing shaft slippage during

operation. The coupling accommodates shafts from 10

mm (3/8 in.) square and up to 13 mm (1/2 in.) diameter

round. A gear release lever allows easy resetting of the

damper to fully open or fully closed.

The housing dimensions of the CV series controllers meet

industry mounting requirements and make the controllers

easy to handle.

The controller device address can be unique for each

controller using the rotary switches that are accessible

through the controller housing.

For more information about installing CV controllers,

refer to CVM03050 VAV Terminal Equipment Controllers

Installation Instructions (Part No. 24-10143-01590)