Emerson CSI 6500 ATG Protection System Features

Familiar Features

System setup is accomplished through Machine Studio configuration software.

The user interface has a similar look and feel to other Emerson software modules, making it familiar and easy to use.

Familiar and easy to use. While connected, users can access integrated predictive features.

View Problems in Real Time

The system comes with ATG View, a mobile application that receives data from the CSI 6500 ATG via Ethernet and/or a wireless router.

Authorized users can view protection status and health data from anywhere

on the plant's Wi-Fi network, either from a PC or a device of their choice.

Supported devices include Apple iOS and Android phones and tablets.

The ATG view allows reliability professionals to see the overall health of the system,

alarm status, external inputs such as bypasses and outputs such as trips and whether they are active.

The CSI 6500 ATG displays all available information for critical devices, such as primary values,

trending data, status data, and predictive data (e.g., PeakVue values).

OPC server helps you integrate with third-party systems

For easy integration with third-party systems, the CSI 6500 ATG is the first protection

system to include a secure embedded OPC UA server.

The CSI 6500 ATG system meets traditional API 670 certification and is certified

for installation in demanding environments that require Class 1 Div2/ATEX Zone 2 certification.

Studies have shown that repairing a machine after it has failed is 50% more costly

than predicting failure and planning for the cost of repair.

For users whose budgets are not large enough to purchase both a protection system and a predictive system,

obtaining predictive data from the protection system is an incremental step toward improving insight into the health of assets.

ATG View provides asset health information to users anywhere in the plant network.