Prosoft EtherNet/IP™ to Remote I/O or DH+ Gateway AN-X2-AB-DHRIO DH+

Remote I/O Scanner

This mode allows users to replace their existing Remote I/O PLC with a ControlLogix or CompactLogix PAC without having to

replace existing racks of I/O.

 Build new controller program without interrupting existing controls, minimizing downtime

 Supports up to 32 racks of Remote I/O

 Supports all Remote I/O baud rates (57.6. 115.2. and 230.4 K baud), and Remote I/O addressing 0 to 76 octal

 Works with both ControlLogix or CompactLogix

 Auto-Configuration utility discovers baud rate and maps discrete I/O reducing configuration errors

DH+

This mode acts as a bridge between an EtherNet/IP and a Data Highway Plus network.

 Programming terminals, and/or processors on an EtherNet/IP network can access legacy processors on a DH+ network

 Download to a PLC5 or SLC through RSLinx

 Configures through web browser

 Supports all DH+ baud rates (57.6. 115.2. and 230.4 K baud)

 Support for DH+ to EtherNet/IP PanelViews upgrades on PLC5 or SLC networks

Flex I/O Scanner

This mode allows PLC's on Remote I/O to connect to and control 1794-AENT EtherNet/IP Flex adapters.

 Designed to replace obsolete 1794-ASB adapters

 Supports up to 16 EtherNet/IP connections

 Each adapter and rack of discrete count as a single connection. Each analog module counts as a single connection