ABB AI910B (AI4-B) Compact Product Suite hardware selector

Features and benefits

• ATEX Certification for Zone 2

• Redundancy (Power and Communication)

• Hot Configuration in Run

• Hot Swap functionality

• Extended Diagnostic

• Excellent configuration and diagnostics via FDT/DTM

• G3 – coating for all components

• Simplified maintenance with auto-diagnostics

• Power supply for 4...20 mA loop powered 2-wire transmitters

• Short and break detection

• Electrical isolation between input / bus and input / power

• 4 channels

The remote S900 I/O system can be installed in non-hazardous

areas or directly in Zone 1 or Zone 2 hazardous area depending on

the selected system variant. S900 I/O communicates with the

control system level using the PROFIBUS DP standard. The I/O

system can be installed directly in the field, therefore the costs for

marshalling and wiring are reduced.

The system is sturdy, error-tolerant and easy to service. Integrated

disconnection mechanisms allow replacement during operation,

meaning that there is no need to interrupt the primary voltage in

order to exchange the power supply units.

S900 I/O type B. For installation in hazardous area Zone 2. For

connecting intrinsically safe field devices installed in Zone 2. Zone

1 or Zone 0.

AI910B Analog Input (AI4-B), input and power supply for 4...20 mA

loop powered 2-wire transmitters.