Basler Electric AEM-2020 and CEM-2020 Expansion Modules

Overview

These expansion modules eliminate the need for expensive external devices

by providing additional contact and analog inputs and outputs to certain

Basler Electric products.

Features

• AEM-2020 Analog Expansion Module

- Eight analog inputs

- Eight resistance temperature device (RTD) inputs

- Two Type K thermocouple inputs

- Four analog outputs

- Inputs and outputs are configurable for 4 to 20 mA and 0 to 10 Vdc ranges

- Controller Area Network (CAN) communication protocol

- Compatible with DGC-2020. DGC-2020HD, DECS-250. DECS-250N,

DECS-250E, and DECS-450

• CEM-2020 Contact Expansion Module

- Ten dry contact inputs

- Twenty-four contact outputs with the CEM-2020

- Inputs and outputs programmable through BESTCOMSPlus® software

- CAN communication protocol

- Compatible with DGC-2020ES, DGC-2020. DGC-2020HD, DECS-250.

DECS-250N, DECS-250E, and DECS-450

Benefits

• AEM-2020 Analog Expansion Module- Easily connects to compatible devices

when additional analog I/O is required to meet difficult specifications.

- Rugged, potted design for the ultimate in reliability for extreme environmental

applications.

- Connects to compatible devices via CAN bus and automatically integrates into

the BESTCOMSPlus® PC software. Fast to configure, simplifying commissioning

of complicated systems.

- Combine this additional I/O with the powerful programmable logic of the DGC-2020.

DGC-2020HD, DECS-250. DECS-250N, DECS-250E, and DECS-450 and eliminate

the need for an additional PLC or other peripheral devices, saving installation

and purchasing costs.- Easily-assigned trip points for the analog inputs can be

scaled by the user to directly reflect the measured parameter.

- A wide variety of generator parameters can easily be integrated into an overall

protection and metering scheme to meet virtually any specification.

• CEM-2020 Contact Expansion Module

- The rugged, potted design of the CEM

-2020 provides ultimate reliability in extreme environments.

- Enables easy addition of contact inputs and outputs through logic, reducing the

need for external control devices, which saves both time and money.

- Connects to compatible devices via CAN bus and automatically integrates into

BESTCOMSPlus software for simple, quick configuration of complicated systems.