ABB PFVA401 Millmate Controller 400

The Millmate Controller 400 is designed to provide many features while being highly user friendly.

The MC 400 covers most mechanical arrangements. This means that the user only needs to follow step-by-step instructions to set up the controller and get the correct rolling force measurements.

. Predefined standard measurement modes .

. Built-in load cell table .

. Filtering times from 1 to 2000 ms .

. Easily configurable analogue/digital inputs/outputs

. Level Detectors

. Step Detectors

. Unit selection (N, kN, MN, kp, t, lb, T) .

. Self-diagnostic test system including sensor test

Data

External connections:

. Excitation current for load cell

. 2 or 4 analogue inputs for load cell signals.

.4 analogue outputs, voltage or current

.8 digital inputs for control signals

.8 digital outputs

. +.8 digital outputs .

. Ethernet connection for service and multiple control units .

.2 serial interfaces type RS-232 for external displays, controls, etc. .

. 1 serial interface type RS-485 for external display .

. High-speed Profibus (optional)