ABB EMB01S-XIO Evolution Module Base

The EMB01S-EMR Evolution Module Base mounts an AI12e, AO02e, DI06e, or DO01e I/O module to the EMC-_B0x Evolution Mounting Base.

or DO01e I/O modules to the EMC-_B0x Evolution mounting base.

The base connects the I/O module to the HN800 I/O bus and connects the I/O cable to the field terminal.

The chassis supports all functions of the AI12e, AO02e, DI06e, or DO01e I/O modules. This includes optional module redundancy.

Features and Benefits

Mounts AI12e, AO02e, DI06e, or DO01e I/O modules to the EMC-_B0x Evolution mounting base

Connecting I/O modules to the redundant HN800 I/O bus

Connect I/O module to NTDI0x TU via NKTU01 cable

Connect I/O module to NIDI01 TM via NKTU02 or NKTM01 cable

General information

Article number 7PAA005096R1 (EMB01S-XIO)

Lifecycle status active

Line redundancy yes

Channel 14. 15 or 16

Hot Swap No

Supported IO modules AI12e, AO02e, DI06e, DO01e

Single or redundant Single

Form Factor EMC-_B0_ Evolution Mounting Chassis

Mounting EMC-DB01. EMC-DB02. EMC-SB01. EMC-SB02

HN800 Bus length 190 mm

MTBF (per MIL-HDBK-217-FN2) PR E: 245.577 hours @ 30˚C, 244.473 hours @ 40˚C, 240.272 hours @ 70˚C

MTTR (hours) 8 hours

Power overvoltage category 1. Tested according to IEC/EN 61010-1

Process Signal Connections Thirteen (13) total: 4-AI, 2-AO, 3-DI, 4-DO

Field power connections @ I/O terminals (TU or TM)

Field power fuse @ I/O terminals (TU or TM)

Signal connection Terminable block on NTDI0x, NIDI01 or HDIOT-XIO-01

Maximum current 250 mA

Galvanic isolation test voltage 1500 V for up to 1 minute

Related Product Recommendations:

IC660TBD024K Genius I/O Terminal Assembly Module

IC687BEM713B Fanuc 90-70 Series Bus Transmitter Unit

DS200KLDBG1ABC DS215KLDBG1AZZ03A Automation Module

DeltaVrm VerticalPlus Input/Output Subsystem carrier

FBM203 P0914SV Channel Isolated 8-Input RTD

FBM204 P0914SYI/O Module 4 Channel

369-HI-R-M-F-E-H-E Motor Management Relay

369-C101 Motor Management Relay

369-LO-0-M-F-E-0-0 Motor Management Relay

IC698PSA100 Fanuc RX7i Series Central Processor

IC698PSA350D Fanuc RX7i Series Central Processor

44A751101-G01 Processor Module

8115-DO-DC 8-Channel Digital Output Module