ABB EIB Delta-Meter Plus Electricity Meters

EIB Delta-Meter Plus Electricity Meters

EIB Delta-Meters Plus are PTB-approved, electronic energy meters with an integrated ABB i-bus® EIB / KNX communication interface.

EIB Delta-Meters Plus are compact, reliable, immune to interference impulses and suitable for use in single-phase and polyphase voltage networks. As the meters have no mechanical moving parts, they can easily be snapped in any position onto DIN rails. The EIB communication interface enables remote reading of the meter data via the ABB i-bus® EIB for billing, energy optimisation, visualisation or installation monitoring purposes.

They can be universally employed for submetering applications in industrial installations, commercial buildings, offices, leisure complexes and private households.

Special features:

●   Precise measurement of energy consumption (kWh, kvarh with combination meter)

●   For 2-, 3- and 4-wire voltage networks with any load

●   Integrated EIB / KNX interface for remote reading of meter data

●   Network monitoring function: recording and display of up to 24 electrical measured variables

●   Automatic wiring check with an installation self-test

●   Easy to read LCD display, LED indicator for energy consumption

●   Direct connection up to 80 A

●   Transformer connection (/1A or /5 A) with transformer rated meter

●   Accuracy classes 1 or 2

●   Tariff meter with 4 tariffs

●   Fulfils standards IEC 61036/61268

●   Resistant to shocks and vibration, can be mounted in any position

●   System pro M design: can be snapped onto 35 mm DIN rail, sealable

EIB Delta-Meters are intended solely for the measurement of electrical energy. The installation and commissioning may only be carried out by electrical specialists. The appropriate norms, guidelines, regulations and specifications should be observed when planning and setting up electrical installations.

Advisory:–  EIB Delta-Meters should be protected from damp, dirt and damage during

transport, storage and operation.–  EIB Delta-Meters should not be operated outside the specified technical data.–  Sufficient cooling for the EIB Delta-Meter must be allowed for.

Cleaning:  If devices become dirty, they can be cleaned using a slightly damp cloth and soap solution should a dry cloth not remove the dirt. Corrosive materials or solutions should never be used.

EIB Delta-Meters should always be disconnected from the supply prior to cleaning.

Maintenance:  EIB Delta-Meters are maintenance-free. No repairs should be carried out if damage occurs (e.g. during transport or storage).