Power Engineering 
K-JIANG
NameDescriptionContent
Current Location:

Prosoft A-PAL/B PA Link Series B PA Gateway

From:ProSoft | author:Mr.Chen | Time :2026-04-17 | 72 view: | 🔊 Click to read aloud ❚❚ | Share:

The PROFIBUS PA gateway allows the user to interface PROFIBUS

PA DPV0/DPV1 to either EtherNet/IP™ or Modbus® devices.

When configured as a Master, the PA Link can exchange up to 2

kilobytes of PROFIBUS PA device and status data.

The PA Link has two Ethernet ports for a Linear or Ring (Device Level

Ring – DLR) Ethernet topology. The Ethernet ports can also be

configured for port mirroring, allowing for better fault analysis.

The PA Link can synchronize to an NTP Server allowing for automatic

time synchronization. It also supports an onboard non-volatile event log

for improved fault finding. The PA Link has a built-in Power Conditioner

which can supply up to 420 mA. The power conditioner is protected

against a configurable overcurrent limit. The module also has a

configurable built-in Fieldbus terminator.

The PA Link provides a range of statistics and tools to provide a

detailed diagnostic overview of each PA Link, which speeds-up fault

finding. The Slate Configuration Utility allows the user to perform a

PROFIBUS PA packet capture of the running Fieldbus which can be

used to analyze the bus behavior and packets received. The PA Link

also provides global and device specific statistics.

Features

• Direct link from PROFIBUS PA to EtherNet/IP or Modbus TCP/IP

• Exchange up to 2 kilobytes of PROFIBUS PA device and status data

• Support for up to 32 PROFIBUS PA slave devices

• Embedded 2 port Ethernet switch – DLR capable

• Built-in Isolated PA Power Conditioner – Max. 420 mA (Temperature limited)

• Configurable bus Current Protection (Trip)

• Built-in configurable Bus Terminator

• Supports PROFIBUS PA Master Redundancy (Active / Standby)

• FDT Asset Management -  DTM Available

Configuration

• The Slate Configuration Utility software is used for configuration and

troubleshooting of the module. The stand-alone configuration utility allows

users to define the setup and configuration of the PROFIBUS PA module,

connections with controllers and devices.


  • Beckhoff EL1814 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs, 3-wire connection
  • Beckhoff EL1819 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs
  • Beckhoff ED1829 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, positive/ground switching, push-in
  • Beckhoff EL1429 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Honeywell X-DCS2000-E Digital Integrated System Manager
  • Automotion LC4A00010 DC BL Motor Control, ATS, Sub Assy, SCP, 115VAC
  • 500T-115VAC - VAS ENGINEERING - DORIC 500 SERIES DIGITSL TEMP INDICATOR - MODEL
  • ABB XZ C828 A101 Didt Dioder Snubber 3BHE039453R0101
  • ABB 3BHB027232R0001 1-Phase Charging Transformer
  • ABB 3BHE006412R0101 Circuit Board UFC762AE101
  • ABB XVC770BE101 3BHE021083R0101 Circuit Board
  • ABB 3BHE024747R0101 GD C801 A 3BHE024748 P104 high-voltage board
  • ABB 3BHE021887R0101 UBCC717BE101 Board 3BHB002751R0102
  • ABB 3BHE032593R0001 Isolated Power Supply
  • ABB 3BSC610023R0001 POWER SUPPLY SD812
  • Beckhoff ED1837 | EtherCAT Terminal, 32-channel digital input, 24 V DC, adjustable, push-in
  • Beckhoff EL1417 | EtherCAT Terminal, 32-channel digital input, 24 V DC, adjustable
  • Beckhoff ED1839 | EtherCAT Terminal, 16-channel digital input, 24 V DC, adjustable, push-in
  • Beckhoff EL1409 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Beckhoff ED1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, push-in
  • Beckhoff EL1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Beckhoff EL1808 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 3 ms, 2-wire connection
  • Beckhoff EL1804 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, 3-wire connection
  • Beckhoff EL1722 | EtherCAT Terminal, 2-channel digital input, 120…230 V AC, 10 ms, without power contacts
  • Beckhoff EL1712-0020 | EtherCAT Terminal, 2-channel digital input, 120 V DC, 3 ms
  • Beckhoff EL1712 | EtherCAT Terminal, 2-channel digital input, 120 V AC/DC, 10 ms
  • Beckhoff EL1702-0020 | EtherCAT Terminal, 2-channel digital input, 220 V DC, 3 ms
  • Beckhoff EL1702 | EtherCAT Terminal, 2-channel digital input, 120…230 V AC, 10 ms
  • Beckhoff EL1512 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 1 kHz
  • Beckhoff EL1502 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 100 kHz
  • Beckhoff EL1382 | EtherCAT Terminal, 2-channel digital input, thermistor, 30 ms
  • Beckhoff EL1262-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, oversampling
  • Beckhoff EL1262-0010 | EtherCAT Terminal, 2-channel digital input + 2-channel digital output
  • Beckhoff EL1262 | EtherCAT Terminal, 2-channel digital input, 24 V DC, 1 µs, oversampling
  • Beckhoff EL1259 | EtherCAT Terminal, 8-channel digital input + 8-channel digital output
  • Beckhoff EL1258-0010 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 1 µs, ground switching, multi-timestamp
  • Beckhoff EL1258 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 1 µs, multi-timestamp
  • Beckhoff EL1264 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 1 µs, oversampling
  • Beckhoff EL1254 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 1 µs, timestamp
  • Beckhoff EL1252-0060 | EtherCAT Terminal, 2-channel digital input, 10 V DC, 1 µs, timestamp
  • Beckhoff EL1252-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, timestamp
  • Beckhoff EL1252-0010 | EtherCAT Terminal, 2-channel digital input, 24 V DC, 10 µs, timestamp
  • Beckhoff EL1252 | EtherCAT Terminal, 2-channel digital input, 24 V DC, 1 µs, timestamp
  • Beckhoff EL1202 | EtherCAT Terminal, 2-channel digital input, 24 V DC, 1 µs
  • Beckhoff EL1144 | EtherCAT Terminal, 4-channel digital input, 12 V DC, 10 µs
  • Beckhoff EL1134 | EtherCAT Terminal, 4-channel digital input, 48 V DC, 10 µs
  • Beckhoff EL1124 | EtherCAT Terminal, 4-channel digital input, 5 V DC, 0.05 µs
  • Beckhoff EL1114 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs, 2-/3-wire connection
  • Beckhoff EL1104 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, 2-/3-wire connection
  • Beckhoff EL1098 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 10 µs, ground switching
  • Beckhoff EL1094 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs, ground switching
  • Beckhoff EL1088 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 3 ms, ground switching
  • Beckhoff EL1084 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, ground switching
  • Beckhoff ELX1058 | EtherCAT Terminal, 8-channel digital input, NAMUR, Ex i
  • Beckhoff ELX1054 | EtherCAT Terminal, 4-channel digital input, NAMUR, Ex i
  • Beckhoff EL1054 | EtherCAT Terminal, 4-channel digital input, NAMUR
  • Beckhoff ELX1052 | EtherCAT Terminal, 2-channel digital input, NAMUR, Ex i
  • Beckhoff EL1052 | EtherCAT Terminal, 2-channel digital input, NAMUR
  • Beckhoff EL1034 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs, potential-free
  • Beckhoff EL1024 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, type 2
  • Beckhoff EL1014 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs
  • Beckhoff EL1012 | EtherCAT Terminal, 2-channel digital input, 24 V DC, 10 µs
  • Beckhoff ED1008 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 3 ms, push-in
  • Beckhoff EL1008 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 3 ms
  • Beckhoff EL1004-0020 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, isolation voltage 2500 V DC
  • Beckhoff EL1004 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms
  • Beckhoff EL1002 | EtherCAT Terminal, 2-channel digital input, 24 V DC, 3 ms
  • Beckhoff EK9520 | EtherNet/IP™ Bus Coupler
  • Beckhoff EK9500 | EtherNet/IP™ Bus Coupler
  • Beckhoff EK9320 | PROFINET RT Bus Coupler
  • Beckhoff EK9300 | PROFINET RT Bus Coupler
  • Beckhoff EK9160 | IoT Bus Coupler
  • Beckhoff EK9020 | Modbus TCP/UDP Bus Coupler
  • Beckhoff EK9000 | ModbusTCP/UDP Bus Coupler
  • Beckhoff EK3100 | PROFIBUS Bus Coupler
  • Beckhoff BK1250 | Compact coupler between EtherCAT Terminals and Bus Terminals
  • Beckhoff BK1150 | EtherCAT Compact Bus Coupler
  • Beckhoff BK1120 | EtherCAT Bus Coupler for standard Bus Terminals
  • Beckhoff EK1960 | TwinSAFE Compact Controller
  • Beckhoff EK1914 | EtherCAT Coupler with integrated digital standard and safety I/Os
  • Beckhoff EK1828-0010 | EtherCAT Coupler with integrated digital outputs
  • Beckhoff EK1828 | EtherCAT Coupler with integrated digital inputs/outputs
  • Kollmorgen AKT2G-BRC-000-000 Brake Chopper Terminal
  • Kollmorgen AKT2G-SM-L50-000 Stepper Motor Terminal, 50 V DC, 5 A, Vector Control
  • Kollmorgen AKT2G-SM-L15-000 Stepper Motor Terminal, 24 V DC, 1.5 A, Vector Control
  • Kollmorgen AKT2G-SM-L15-000 Stepper Motor Terminal, 24 V DC, 1.5 A, Vector Control
  • Kollmorgen AKT2G-ENC-180-000 1-Channel Incremental Encoder Interface
  • Kollmorgen AKT2G-ENC-190-000 Incremental Encoder Interface with Differential Input
  • Kollmorgen AKT2G-AT-425-000 4 Ch Analog Outputs 0-10 and -10 to +10 Vdc
  • Kollmorgen AKT2G-AT-410-000 4 Ch Analog Outputs 0-10 and -10 to +10 Vdc
  • Kollmorgen AKT2G-SDO-004-000 4-channel digital output terminal, Safety
  • Kollmorgen AKT2G-DT-008-000 8 Ch Digital Output 0.5A
  • Kollmorgen AKT2G-SDI-004 4-channel digital input terminal, Safety
  • Kollmorgen AKT2G-DNH-008-000 8 Ch Digital Inputs
  • Kollmorgen AKT2G-DN-008-000 8 Ch Digital Inputs
  • Kollmorgen AKT2G-DN-002-000 2 Ch Digital Input
  • Kollmorgen AKT2G-AN-400-000 4-channel thermocouple input terminal
  • Kollmorgen AKT2G-AN-240-000 2-channel input terminal for resistance sensors
  • Kollmorgen AKT2G-AN-430-000 4-channel analog input, parameterizable
  • Beckhoff EK1818 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1561 | 1-port EtherCAT plastic optical fiber junction
  • Beckhoff EK1541 | EtherCAT Coupler with ID switch, plastic optical fiber
  • Beckhoff EK1521 | 1-port EtherCAT fiber-optic junction
  • Beckhoff EK1501-0010 | EtherCAT Coupler with ID switch, single-mode fiber optic
  • Beckhoff EK1501 | EtherCAT Coupler with ID switch, multi-mode fiber optic
  • Beckhoff EK1400 | EtherCAT G Coupler
  • Beckhoff EK1322 | 2-port EtherCAT P junction with feed-in
  • Beckhoff EK1310 | 1-port EtherCAT P extension with feed-in
  • Beckhoff EK1300 | EtherCAT P coupler
  • Beckhoff EK1122-0080 | 2-port EtherCAT junction, Fast Hot Connect
  • Beckhoff EK1122-0008 | 2-port EtherCAT junction with M8 connection
  • Beckhoff EK1122 | 2-port EtherCAT junction
  • Beckhoff EK1121-0010 | 1-port EtherCAT junction, Extended Distance
  • Beckhoff EK1110-0043 | EtherCAT EJ coupler, CX and ELterminal connection
  • Beckhoff EK1110-0008 | EtherCAT extension with M8 connection
  • Beckhoff EC1110 | EtherCAT Terminal extension, RJ45, angled, push-in
  • Beckhoff CU8130-0240 | UPS modul, battery-backed
  • Beckhoff CU8130-0120 | UPS module, battery-backed
  • Beckhoff CU8110-0120 | UPS module, capacitive
  • Beckhoff CU8110-0060 | UPS module, capacitive
  • Beckhoff CX2062 | Embedded PC with Intel® Xeon® D-1548
  • Beckhoff CX2042 | Embedded PC with Intel® Xeon® D-1527
  • Beckhoff CX2500-0021 | Audio interface for CX20x3
  • Beckhoff CX2100-0914 | Power supply unit for external battery pack for CX20x3 and CX2042
  • Beckhoff CX2100-0024 | 200 W power supply module
  • Beckhoff CX2100-0022 | 100 W power supply module
  • Beckhoff CX2100-0014 | Power supply unit for CX20xx, 130 W
  • Beckhoff CX2100-0004 | Power supply unit for CX2033, 45 W