A-B 2198-S160-ERS3 Single Axis Inverter Module

About the 2198-S160-ERS3

The 2198-S160-ERS3 Kinetix 5700 Single-Axis Inverter Module is a single-axis inverter used by Allen-Bradley in many integrated motion control applications.

The inverter has a 400 Hz/100 Hz loop bandwidth, a 4 KHz control (PWM) frequency, and an output power supply of 85 ARMS.

120.2 A (0-pk) and a maximum of 160 ARMs, 226.2 A (0-pk).

The 2198-S160-ERS3 has a three-phase power output of 60.1 KW, an internal capacitance of 1120 μF, and requires 92.3 A DC input current at 458-747 V DC.

When the servomotor connected to the inverter does not have a holding option, the inverter has a control current of 4.6A at 24V DC supply.

The inverter also has a control current of 9.6A at 24V DC if the servomotor has braking enabled,.

And the inverter will receive 4A inrush current under 24V DC.

The 2198-S160-ERS3 has an operating heat sink relative to the percentage of rated output power of the inverter of

270W at 20%, 420W at 40%, 570W at 60%, 760W at 80%, and 950W at 100% of utilized output power.

Motor feedback and auxiliary feedback are provided via a 15-pin universal feedback connector (UFB) and a 2-pin motor feedback connector (MF).

and is pre-installed with an EtherNet network connection port.

The 2198-S160-ERS3 has an operating temperature range of 0-50°C (32-122°F), a non-condensing relative humidity of 5-95%, and a storage range of -40-70°C (-40-158°F).

It has a mounting height of 1500 meters (4921 feet), is not rated, and can withstand 15G operational shock and 2G vibration from 55-500Hz.

It is c-UL, CE, KC, c-TICK, ODVA, and OSHA certified and has an IP20 protected enclosure.

The 2198-S160-ERS3 weighs approximately 6.8Kg (15 lbs) and measures approximately 252mm x 478mm x 100mm (9.92" x 18.82" x 3.94").