A-B 2198-S086-ERS3 Single Axis Inverter Module

Product Description: Allen-Bradley 2198-S086-ERS3

The Allen-Bradley 2198-S086-ERS3 features 29.7 kW continuous output power, 22-40 lb*in (2.5-4.5 N*m) torque values, and 560 microfarads of internal capacitance.

About the 2198-S086-ERS3

Allen-Bradley's 2198-S086-ERS3 Kinetix 5700 single-axis frequency converter is a single-axis frequency converter module that is

for controlling machines with high shaft counts and high power requirements. The inverter has current/speed loop bandwidths of 100Hz and 400Hz.

The inverter has a current/speed loop bandwidth of 100 Hz and 400 Hz, a pulse width modulation (PWM) frequency of 4000 Hz, and a continuous output current of 43 A and a 0-pk output current of 60.8 A.

The peak values of continuous and 0-pk output currents are 86A and 121.6A, respectively, and the rated output power of the inverter is 29.7KW.

It requires a DC input current of 45.7ADC and has an internal capacitance of 560μF.

The 2198-S086-ERS3 is rated at 4.6A for non-braked servo motors.

The rated control power for a braked servomotor is 9.6A, and the inrush power at startup is 4A.

Rated power output percentage is 190 watts at 20%, 225 watts at 40%, 325 watts at 60%, 300 watts at 80%, 300 watts at 100

It has a maximum power dissipation of 190 watts at 20% of rated power output, 225 watts at 40%, 325 watts at 60%, 300 watts at 80%, and 475 watts at 100%.

The 2198-S086-ERS3 has an operating temperature range of 0 to 50 °C (32 to 122 °F) and a humidity limit of 5 to 95% non-condensing.

It can be stored over a temperature range of -40 to 70 °C (-40 to 158 °F). Even when installed at an altitude of 1.500 meters (4.921 feet), the

Even when installed at an altitude of 1500 meters (4921 feet), it will not be downgraded and will maintain optimal functioning under 2 G of operating vibration and 15 G of shock.

The 2198-S086-ERS3 provides motor and auxiliary feedback through feedback connections on the 2-pin Motor Feedback (MF) connector and 15-pin Universal Feedback (UFB) connector.

It also supports EtherNet network connectivity through the Ethernet port on the inverter and a 0.15-meter (6-inch) Ethernet cable.

The 2198-S086-ERS3 weighs an average of 5.21 kg (11.5 lbs.).

Measuring 252 mm (9.92 in.) x 358 mm (14.09 in.) x 55 mm (2.17 in.), it is CE, C-TICK, KC c-UL, ODVA, and OSHA certified.

Technical Description of the 2198-S086-ERS3

The Allen-Bradley 2198-S086-ERS3 features 29.7 kWatts continuous output power, 22-40 lb*in (2.5-4.5 N*m) torque values, and 560 Microfarads internal capacitance.

Related Product Recommendations:

IC660TBD024K Genius I/O Terminal Assembly Module

IC754CSX06CTD General Electric Quick Panel Touch Screen

44A751101-G01 Processor Module

8115-DO-DC 8-Channel Digital Output Module

DeltaVrm VerticalPlus Input/Output Subsystem carrier

IC687BEM713B Fanuc 90-70 Series Bus Transmitter Unit

DS200FCGDH1B GATE ASSIGNMENT AND STATUS CARD (FCGD)

RS-FS-9001 362A1052P404 Flame Sensor/Detector

FBM203 P0914SV Channel Isolated 8-Input RTD

FBM204 P0914SYI/O Module 4 Channel

369-C101 Motor Management Relay

369-LO-0-M-F-E-0-0 Motor Management Relay