A-B Rockwell 2094-BL02 Line Interface Module

The Allen-Bradley 2094-BL02 module is a line interface module that is part of the 2094 Kinetix 6000 product line.

It operates at three-phase voltages from 400 to 460 volts AC and a current rating of 30 amps.

The module has an internal control line filter rating of 230 volts AC.

The 2094-BL02 module is a line interface module manufactured by Allen-Bradley/Rockwell Automation as part of the 2094 Kinetix 6000 product line.

The module has a three-phase voltage rating of 400 to 460 volts AC, a current rating of 30 amps, and an internal control line filter rated at 230 volts AC.

It also has a 24-volt DC power supply output voltage with a current capacity of 8 amps.

The 2094-BL02 Line Interface Module comes with components such as connector sets for the 2094-ALxxS, BLxxS and XL75S-Cx modules.

These items include the volt AC line (IPL), input/output (IOL), control power supply (CPL), and volt AC load (OPL),

230-volt auxiliary output (P2L), 24-volt brake input/output power (P1L), and auxiliary 230-volt input (APL) connectors.

The Allen-Bradley 2094-BL02 module also features a connector set for the 2094-AL09 and 2094-BL 02 line interface modules that

This includes 24-volt brake input/output power (PSL), AC load (OPL), VAC line (IPL), and control power (CPL) connectors.

However, the I/O (26-pin) connectors for the 2094-BL02 and 2094-AL09 modules are not provided.

The 2094-BL02 line interface module has several requirements for proper installation.

It must be encapsulated in a grounded enclosure that provides protection in accordance with EN 60529 (IEC 529).

make the internal parts of the module inaccessible to unskilled operators, and meet CE and UL requirements.

The NEMA 4X enclosure meets or exceeds all of these requirements and provides an IP 66 rating.

Panels installed in the enclosure for mounting system components should be on a hard, flat, vertical surface that is not subject to moisture, shock, or vibration.

This surface will not be subject to moisture, shock, oil mist, vibration, corrosive vapours or dust.