A-B 1336E-B075-AE-EN-HA2-L6 Adjustable Frequency Drive

Allen-Bradley/Rockwell Automation 1336E-B075-AE-EN-HA2-L6 Frequency Drives

is designed and manufactured as an adjustable frequency inverter within the 1336 IMPACT inverter series.

It uses its adjustable frequency to increase or decrease the speed and torque ratings of motors in Allen-Bradley/Rockwell Automation PLC systems.

The 1336E-B075-AE-EN-HA2-L6 adjustable-frequency drive produces up to 75 hp of nominal output power during operation.

It supports multiple start options, such as an automatic start option and a flying start option.

The 1336E-B075-AE-EN-HA2-L6 Adjustable Frequency Drive also features non-volatile parameter storage, a programmer/controller HMI with digital potentiometer, and a 115 VAC control interface.

The 1336E-B075-AE-EN-HA2-L6 drive is a 1336 IMPACT drive manufactured by Allen-Bradley.

It is rated at 380 to 480 volts AC, 56 kilowatts and 75 horsepower.

It is equipped with a programmer/controller with digital potentiometer HMI to simplify drive control and programming.

Up to 16 programmable speed command transitions are available on the drive, which supports SCANport communications and English as the programming language.

The 1336E-B075-AE-EN-HA2-L6 IMPACT drive is designed to provide unrivaled speed control.

The diagnostic features on this drive allow real-time monitoring of its logic board and power structure.

It has 32 entry fault queues and 32 entry warning queues with markers for clearing faults and timestamping power-ups.

Flying start mode on this drive applies to motors that are already spinning loads.

As with all B-frame 1336 IMPACT drives, the 1336E-B075-AE-EN-HA2-L6 drive does not support network connectivity through an isolated gateway.

Its memory storage is non-volatile, and it has a NEMA 1 (IP20)/EMC enclosure and a 115-volt AC control interface.

The function blocks on this drive provide greater flexibility than other drives.

Connecting the 1336E-B075-AE-EN-HA2-L6 IMPACT Drive to a Motor Using a Long Cable

Cable terminators or output chokes may be required to minimize voltage reflections at the motor terminals.

It can be fitted with different types of cables including shielded, unshielded and armored cables.

The drive is designed to use a three-phase power supply that is symmetrical to ground and supports the use of a line reactor or isolation transformer if the power supply encounters power line conditions that could cause a fault.

This 1336 PLUS II adjustable frequency AC drive is a 380-480VAC unit with 56 (75) kilowatts (kW) of power (horsepower) and has an (n) NEMA 1 (IP20)/EMC enclosure.

Related Product Recommendations:

IC660TBD024K GeniusI/O Terminal Assembly Module

1769-OF2 Analog Output Module

SK-G9-GDB1-D292 Medium and High Voltage Inverter Cooling Fan Motherboards

1756-IF4FXOF2F ControlLogix Discrete High-Speed Analog I/O Module

5205-DFNT-PDPS EtherNet/IP to PROFIBUS DP Slave Gateway

IC200ALG327H 12-Channel 13-Bit Voltage Analog Output Module

5X00419G01 Ethernet Link Controller

1336-BDB-SP6C GATE DRIVER BOARD

1769-L30ER Dual Ethernet Controller Device

HE693THM884M Thermocouple Input Module

D2D160-BE02-11 AC Centrifugal Fans Cooling Fan Assembly