Power Engineering 
K-JIANG
NameDescriptionContent
Current Location:

ABB Advant Controller 31 40 & 50 Series

From:ABB | author:Mr.Chen | Time :2024-12-31 | 1052 view: | 🔊 Click to read aloud ❚❚ ▶ | Share:

General setup rules

An ABB AC 31 system always includes an AC 31 central unit. There are three types of central units:

- The 40 series central unit, with a local inputs / outputs extensions interface

- The 50 series central unit, with a local inputs / outputs extensions interface

and a CS 31 bus interface

- The 90 series central unit, with a CS 31 bus interface

Each central unit incorporates a specific number of binary inputs / outputs and occasionally

analog. It is possible, depending on the central unit, to increase the number of inputs / outputs,

to add input / output extensions connected directly to the central units or remote input / output

units via the CS 31 twisted pair.



Central units with extensions

The 40 and 50 series. It’s possible to increase the number of inputs / outputs of the basic

central unit by adding up to 6 local extension units of either type, binary or analog (Figure 1-1).

2.2. Central units with CS 31 bus

The 50 and 90 series. It’s possible to increase the number of inputs / outputs of the basic

central unit by adding remote units. The central unit controlling the system is called the

MASTER central unit. The maximum bus length is 500 m without an amplifier and 2000 m with

3 amplifiers (1 NCB or NCBR unit enables bus amplification for 500 m).

The master central unit can manage up to 31 connection points called SLAVES, such as:

- A remote unit with extension possibilities: a maximum of 6 extension units comprising of a

maximum of 8 analog input channels and 8 analog output channels

- A simple remote unit (without extension) with analog or binary inputs / outputs

- A remote TCAD display

- An ABB NCSA-01 variable speed drive interface

- A high speed counter unit

- A central unit (50 series with extension possibilities, 90 series and the previous 30 series)

- Or any other device which disposes of a CS 31 communication (see Figure 1-2).

Comment:

A slave fitted solely with binary channels occupies 1 connection point.

A slave fitted with binary and analog channels occupies 2 connection points of the available 31.

The maximum number of remote ANALOG units depends on the MASTER central unit:

- 50 series: - a maximum of 31 remote analog input units

- a maximum of 31 remote analog output units

- a maximum of 15 extensible remote units (ICMK14F1) with analog input / output

extensions + 1 remote analog input / output unit (15 x 2 + 1 = 31)

- or a mixed binary / analog configuration within the previous limits

- 90 series: - a maximum of 12 remote analog input units

- a maximum of 12 remote analog output units

- or a maximum of 12 slaves with analog extensions

Operation of the 40 and 50 series central units

3.1. Functional diagram

The 40 and 50 series central units memory is composed of two distinct areas:

- A SRAM memory where the user program and data is loaded.

- A Flash EPROM memory which contains:

- a backup of the user program with the program constants,

- the configuration data,

- and the system program protected against access from the user program.

An incorporated battery, which is available only in the 50 series, also enables the backup of

internal variables.

The user program is a set of universal functions conceived by the constructor to cover all

applications and ensure all the basic PLC functions. It is developed with the AC31GRAF

software. After being translated into instructions understable by the central unit it is loaded in

RUN or STOP mode into the SRAM and then saved from the SRAM to the Flash EPROM.

Thereby, at each program launch the user program, saved in the Flash EPROM, is copied to

the SRAM for processing by the microprocessor (Figure 1-3).

The structure of the system program memory, the user program, the inputs / outputs and

internal variables are described in the annex (mapping).

Program execution

The central unit microprocessor ensures the cyclic execution of the system as shown in

Figure 1-4.

The internal processing:

- PLC monitoring and control

- and processing requests from the terminal operator,

is executed in parallel with the previously described cycle.

The main program is processed sequentially. It may call up to a maximum of 12 sub-programs.

  • Yokogawa PW501 Power Supply Unit
  • Basler Electric PT PT Sensing Card
  • Basler Electric IDP-1201 Interactive Display Panel
  • Basler Electric DXCB-2 De-Excitation / Crowbar Module
  • Basler Electric FGD-2 Field Ground Detection
  • Basler Electric IT-2 Isolation Transducer
  • Basler Electric DIOM-2 Digital Input Output Module
  • Basler Electric AIOM-2 Analog Input Output Module
  • Basler Electric BCM-2 Bridge Control Module
  • Basler Electric ECM-2 Excitation Control Module
  • Basler Electric SSR 32-12 Static Voltage Regulator 9 1859 00 100
  • Basler Electric TRR00696 TRANSFORMER; 346/380/415V PRI, 115 V SEC 1KVA, 50/60HZ
  • Basler Electric AEC63-7 Analog Excitation Controller 220-277v 50-60hz
  • Basler Electric BE1-25 M1EA6PA5S1F SOLID STATE TIME OVERCURRENT RELAY
  • Basler Electric 9 1049 04 100 PC BOARD
  • BASLER 125-12 STATIC VOLTAGE REGULATOR
  • Basler Electric Reactor BE12819001, 3.84 KVA
  • Teradyne 535-100-00 Basler Electric 9368200100 Power Supply
  • Basler Electric BE4-51 Electric Time Overcurrent Relay
  • Basler Electric 9 2849 00 101 Desc Power Module
  • BE1-67 B1E Z2J A3C3F Basler Electric Directional OC Relay
  • Basler Electric PRP110 90 55600 100 Reverse Power Solid State Protective Relay
  • Basler Electric BE30631001 Transformer
  • Basler Electric SSR 32-12 Static Voltage Regulator Sensing 120-600V 50/60/400Hz
  • Basler Electric MVC236 / MVC236 Manual Voltage Control
  • Basler Electric 9040000100UFOV UNDER FREQUENCY/OVERVOLTAGE PROTECTIVE MODULE
  • Basler Electric SR4A2B10A3E / SR4A2B10A3E Static Voltage Regulator
  • Basler Electric BE1-25 M1EA7TN5R1F SOLID STATE TIME OVERCURRENT RELAY
  • Basler Electric BE 12296 001 HOBART 111983-2 TRANSFORMER
  • Basler Electric 905970-104 REV.M VOLTAGE REGULATOR
  • Basler 9262103004 Voltage Regulator Board For Basler DECS-4+A451:A48200
  • Designed to Protect PWM-type Basler ICRM-7 Inrush Current Reduction Module
  • Basler Electric KR4F VOLTAGE REGULATOR 9042600100 600V 50/60Hz
  • Basler Electric 9 2226 00101 NSNB
  • Basler Electric BE303280001 Transformer
  • Basler Electric BE1-25 M1FA6PA4S0F SOLID STATE TIME OVERCURRENT RELAY
  • Basler Electric SR4A2B05B3E Static Voltage Regulator SVR w/o Cover
  • Basler Electric BE127 Under Voltage Relay A3EA1JA0S5F
  • Basler Electric 3300C03B1028-G01 Super Spike Suppressor
  • Basler Electric BE32965001 Transformer With Cissell TU12874 Timer Board Kit
  • Basler Electric D90 96801 100 PCB CARD
  • BASLER BE1-81 / BE1-81-T1E-E1C-A0N1F / 9106400 UNDERFREQUENCY SS RELAY DAMAGED
  • Basler Electric 3280024-14 AGP3600-T1-D24 12.1" FLEX Network HMI Touch
  • Basler Electric SR4A2B10B1A Static Voltage Regulator
  • Basler Electric SR8A2B05B3A Static Voltage Regulator
  • Basler Electric BE34062001 G18 Transformer N And P Voltage F840101
  • Basler 9269101107 Voltage Regulator Board For Basler DECS-400
  • Basler Electric SR32A-2B13B3E STATIC VOLTAGE REGULATOR
  • DECS100-B15 Basler Automatic Voltage Regulator For Basler Electric Generator
  • Basler Electric SR8A-2B15B3A STATIC VOLTAGE REGULATOR SR8A2B15B3A
  • Basler Electric SR4A-2B16B3A STATIC VOLTAGE REGULATOR
  • Basler Electric SR4A-2B16B3E Static Voltage Regulator
  • Basler Electric SR8A2B06B3A STATIC VOLTAGE REGULATOR
  • Hirschmann (Belden)MACH1000, RSPx, RSR and GREYHOUND Power Cord - Schuko 2,5m
  • Hirschmann (Belden)PC150/72V/48V-IP67 DC/DC converter with 48 V power output
  • Hirschmann (Belden)RPS 260/PoE EEC 48 - 56 V DC rail power supply unit
  • Hirschmann (Belden)RPSS120-24V EEC 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS480-48V EEC 48 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS240-48V EEC 48 V DC DIN rail power supply unit
  • Hirschmann (Belden)PC150/110V/54V DC/DC converter with 54 V power output
  • Hirschmann (Belden)RPS 80 EEC 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS75-24V EEC 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPS 15, Rail Power Supply 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS240-48V EEC 48 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPS 120 EEC 24 V DC DIN rail power supply unit
  • GE Energy MVDL1000-47931101 Power Conversion Module 690V 1000A
  • GE Energy MVDL8 00-479 3110 1-A Power Conversion Delta Module for MV3000 Drive
  • METSO D201925 ACN CS Controller Module DCS DNA System Processor
  • Hirschmann GMM20-MMMMMMMMSZ9HHS9 GREYHOUND1042 Fast Ethernet media module
  • Hirschmann GRS1042-6T6ZTLL12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZTLL12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-6T6ZTHH12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZTHH12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZSHH00Z9HHSE2A99 Modular managed Industrial Switch
  • Hirschmann GRS1042-6T6ZSHH00Z9HHSE2A99 Modular managed Industrial Switch
  • Hirschmann GRM20-ZZZZZZZZSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-ZZZZTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-TTTTTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-MMMMTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-MMMMMMMMSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRS1030-8T8ZSMMV9HHSE2S 8 x FE TX + 8 x FE SFP + 4 x FE/GE Combo + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1030-16T9SMMV9HHSE2S 16 x FE TX + 4 x FE/GE Combo + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1020-8T8ZSMMV9HHSE2S 8 x FE TX + 8 x FE SFP + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1020-16T9SMMV9HHSE2S 16 x FE TX + up to 8 x FE ports via additional media modules
  • GE UCECH1A UCSE Mark VIe Controller
  • GE IS420UCSEH2C UCSE Mark VIe Controller
  • GE IS220UCSBH4A UCSE Mark VIe Controller
  • GE IS220UCSBH3A UCSE Mark VIe controller module
  • GE IS220UCSBH1A UCSE Mark VIe controller module
  • GE IS420UCSEH2B UCSE Mark VIe controller module
  • GE IS420UCSEH2A UCSE Mark VIe controller module
  • Hirschmann Basic Switches - RSB20-0900VVM2SAABHH Ethernet/Fast Ethernet-Switch
  • Hirschmann BXP62-28TX-EECC-HV-3A-BP HiOS 3A BXP
  • Hirschmann BXP62-28TX-EECC-HV-2A-BP BXP HiOS 2A
  • Hirschmann BXP62-20TX-EECC-HV-3A-BP HiOS 3A
  • Hirschmann BXP62-20TX-EECC-HV-2A HiOS 2A BXP
  • Hirschmann BXP62-28TX-EECC-HV-3A HiOS 3A BXP
  • Hirschmann BXP62-28TX-EECC-HV-2A HiOS 2A BXP Switches
  • Hirschmann BXP62-20TX-EECC-HV-3A BXP Switches
  • Hirschmann BXP62-20TX-EECC-HV-2A-BP BXP Switches
  • Hirschmann RSB20-0900VVM2TAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900MMM2TAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900S2TTAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900M2TTAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0800S2S2TAABE Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0800M2M2TAAB Ethernet Switch EEC MM SC RSB20 Series
  • Hirschmann RSB20-0800T1T1TAAB Ethernet Switch EEC RSB20 Series
  • Hirschmann RSB20-0900VVM2SAAB Ethernet Switch 942014008 RSB20 Series
  • Hirschmann RS30-2402O6O6SDAE Ethernet Switch; Managed; Enhanced; 24xRJ45; 2x1Gig Fiber; 943434039
  • Hirschmann RSB20-0900MMM2SAAB Ethernet Switch 942014007
  • Hirschmann RSB20-0900S2TTSAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, SM SC, RSB20 Series
  • Hirschmann RSB20-0900M2TTSAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, MM SC, RSB20 Series
  • Hirschmann RSB20-0900ZZZ6SAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, RSB20 Series
  • Hirschmann RSB20-0800S2S2SAAB Ethernet Switch, Managed, 8 Port, 12 to 24 VDC, SM SC, RSB20 Series
  • Hirschmann RSB20-0800M2M2SAAB Ethernet Switch
  • Hirschmann RSB20-0800T1T1SAAB Ethernet Switch, Managed, 8 Port, 12 to 24 VDC, RSB20 Series
  • Hirschmann 4C4C4C4C999 16 RJ45/SFP Combo Ports (support 100 and 1000 Mbit/s SFP)
  • Hirschmann MAR1142 Full Gigabit Ethernet Switch with Ports on the rear, PoE
  • Hirschmann MAR1140 Full Gigabit Ethernet Switch with Ports on the rear
  • Hirschmann MAR1042 Full Gigabit Ethernet Switch with PoE
  • Hirschmann MAR1132 Gigabit Ethernet Uplink with Ports at the bcak and 4 Ports PoE
  • Hirschmann MAR1130 Gigabit Ethernet Uplink with Ports at the bcak
  • Hirschmann MAR1032 Gigabit Ethernet Uplink with 4 Ports PoE
  • Hirschmann MAR1122 Fast Ethernet Uplink with Ports at the back and 4 Ports PoE
  • Hirschmann MAR1120 Fast Ethernet Uplink with Ports at the back
  • Hirschmann MAR1022 Fast Ethernet Uplink with 4 Ports PoE
  • Hirschmann MACH 1040 Full Gigabit Rack Mount Switches
  • Hirschmann MAR1030 Ruggedized managed Ethernet Switches, 19" cabinet mount