Bently 3300 XL NSv Proximity Transducer System Proximitor Sensor

The 3300 XL NSv Transducer System design allows it to replace both the 3300 RAM 

Transducer Systems and the 3000-series or 7000-series 190 Transducer System.

Upgrades from the 3300 RAM system to the 3300 XL NSv system may use the existing probe, extension cable,

and monitoring system with 3300 XL NSv Proximitor Sensor.

Upgrades from the 3000-series or 7000-series Transducer System must replace the probe, 

extension cable, and Proximitor Sensor with NSv components.

The 3300 XL NSv Transducer System has an Average Scale Factor of 7.87 V/mm (200 mV/mil),

which is the most common output for eddy current transducers.

Its enhanced side-view and small target characteristics give it a shorter linear range

than the Bently Nevada 3300 XL-series 5 and 8 mm Transducer System.

The 1.5 mm (60 mils) of linear range exceeds the linear range of the 3000-series 190 Transducer System.

Proximitor Sensor

The 3300 XL NSv Proximitor Sensor has similar features to those found in the 3300 XL 8 mm Proximitor Sensor.

Its thin design allows the user to mount it in either a high-density DIN-rail installation or a more traditional panel mount configuration.

Improved RFI/EMI immunity allows the 3300 XL NSv Proximitor Sensor to achieve European

CE mark approvals without any special mounting considerations.

This RFI immunity also prevents nearby high frequency radio signals from adversely affecting the transducer system.

SpringLoc terminal strips on the Proximitor Sensor require no special installation tools and facilitate faster, highly robust field wiring connections.