CTI 2500-C100 CPU with 128K User Memory

The 2500-C100 CPU provides discrete, analog, loop, advanced mathematical

and high-speed sequential control capability for your CTI 2500 Series® or

Simatic® 505 control system.

Features

• Replaces Siemens® 545-1103 and 545-1105 with no rewiring

• Note that if the Siemens® processor includes a Profibus-DP annex card,

then 2500-C200 must be used

• 128K user memory

• 1024 digital / 1024 analog I/O

• 16 loops / 32 alarms

• Built-in Ethernet for programming and MMI

• Built-in USB for programming

• Built-in SD flash card slot for firmware update

Application Notes

• Capturing Diagnostic Information on CTI 2500 Series CPUs (YouTube Video)

• Redundancy and Backup Solutions (MS-Powerpoint)

• Understanding CIDR Notation Used for IP Address Display on 2500 Series®

Processors

• Connecting CTI 2500 Series® Processors to Siemens® COROS® OP/TP HMI

Units using Profibus - Driver Files & Documentation

• Providing Diagnostic Data for Support on CTI 2500 Series® Processors and

Coprocessors

• What causes a CPU to go into Fatal Error and how do I recover?

• Adding Serial Ports to 2500 Series® Processors using GridConnect NET232 Adapter

• Configuration of Serial Ports on CTI 2500 Series® and Simatic® 545/555 Processors

• Identifying Hardware Revision Level on 2500 Series® Processors

• Accessing Memory Above 1856K on 2500-C400 Processors using APT®

• Optimizing Performance Using the 2500 Series® Processor

• Connecting to a 2500 Series® Processors using PLC Workshop

• 2500 Series® Redundancy Options

• Guide to Upgrading TI560/565 to CTI 2500 Series® System

• Guide to Upgrading TI520C& 530T to CTI 2500 Series® System

• Recovering the Event Log from a CTI 2500 Series® Processor

• 2500 Series Processor V6.02 Firmware Enhancements

• Using the Port Lockout Feature on 2500 Series® Processor to prevent simultaneous

program edits

• CPU Redundancy with 2541 and 2500P-ACP1/JACP (pdf application note)

• Setting Up S7-1500 as a Profibus-DP Slave on CTI 2500 Series® Processors

• CPU Redundancy with 2541 and 2500P-ACP1/JACP (sample program files for CPU,

2541. ACP1/JACP)

• Setting Up S7-1500 as a Profibus-DP Slave on CTI 2500 Series® Processors- Sample

Files

• Recovering Diagnostic Data from a CTI 2500 Series® Processor

• E89 Error on 2500-Cxxx Family Processors

• PID Loop Bumpless Transfer with CTI and Simatic/TI PLCs