Power Engineering 
K-JIANG
NameDescriptionContent
Current Location:

A-B 1746-BLM Blow-molding Module

From:A-B | author:Mr.Chen | Time :2024-11-23 | 1126 view: | 🔊 Click to read aloud ❚❚ ▶ | Share:

Features

This 4-axis position-control module has these features:

• Open-loop or closed-loop control

• Independent and coordinated axis control

• Position- and time-based control

• Accumulator push-out control

• Zero-scale/full-scale (offset & span) calibration for position inputs

• PID with anti-windup, bumpless parameter changes, setpoint weighting, and 

limited high-frequency derivative gain.

• Profile interpolation (linear or cubic spline) between setpoints

• Converging/diverging tooling (direct/reverse acting control)

• Three hold values per axis: manual position, purge, or die gap

• Independent profile scale and offset adjustments 

• Automatic parison weight adjustment

• Setpoint marking

Overview

The module performs its servo control task independently, but is dependent on the 

SLC processor for all of its configuration and run-time information. The processor 

may be also be used to supply process data or timing information over the 

backplane in certain situations (e.g. parison drop synchronization on continuous 

extrusion machines, or accumulator position in reciprocating screw machines).

The module uses a digital signal processor running a 

Proportional-Integral-Derivative (PID) algorithm to control four axes of motion. 

Four analog inputs and four analog outputs are used for process variables and 

signals, while four digital inputs and four digital outputs are used for start-of-drop 

synchronization and profile step synchronization signals, respectively. An excitation 

voltage is provided for use with linear potentiometers.

Communication with the SLC Processor

• shared memory

• control bit/status bit handshake

• micro processor

• PID control algorithm

• digital I/O

• analog I/O

Shared memory

From the ladder programmer’s perspective, communication with the module is via 

five data files located in shared memory on the module:

Config(G) File

contains information regarding the operational mode and feature 

settings of the module. You specify the contents of this file with 

the ladder logic programming utility (RSLogix500). Entries in the 

file are static and read-only from the module’s perspective (e.g. 

time vs. position based operation). This file is automatically 

downloaded to the module when you switch the SLC processor to Run mode. 

Output File

contains 32 16-bit entries used by ladder program to command 

module operation. The Output File may also be used to supply 

process data to the module in certain situations. Entries in this 

file are updated automatically, at the end of each scan, by the 

SLC processor from the user data file but may be written at any 

time by immediate I/O instructions in the ladder program.

Input File

contains 32 16-bit entries used by ladder program to extract 

status information from the module. The Input File contains 

acknowledge bits corresponding to control bits in the Output 

File, as well as information pertaining to the profile executing on 

each analog I/O channel (step number, setpoint, analog input, 

process variable, control output, etc.) and a parameter error flag. 

The entries in this file are read automatically, once per scan, by 

the SLC processor into the user data file, but may be read at any 

time by immediate I/O instructions in ladder program.

M0 File

contains four axis control structures and five setpoint profiles. 

Each axis has a variety of PID and profiling options, controlled 

by its axis control structure. Each axis also has a unique 

256-point setpoint profile. A single master setpoint profile is used 

with an “interpolate” command to ease the task of generating setpoint profiles. 

Entries in the M0 File are written by move or copy instructions in 

ladder program. Unlike changes made to the Output File, which 

are automatically detected by the module, the module must be 

explicitly instructed to download axis-control structures and 

setpoint profiles from shared memory (done by setting bits in the Output File).

  • GE Energy MVDL1000-47931101 Power Conversion Module 690V 1000A
  • GE Energy MVDL8 00-479 3110 1-A Power Conversion Delta Module for MV3000 Drive
  • METSO D201925 ACN CS Controller Module DCS DNA System Processor
  • Hirschmann GMM20-MMMMMMMMSZ9HHS9 GREYHOUND1042 Fast Ethernet media module
  • Hirschmann GRS1042-6T6ZTLL12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZTLL12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-6T6ZTHH12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZTHH12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZSHH00Z9HHSE2A99 Modular managed Industrial Switch
  • Hirschmann GRS1042-6T6ZSHH00Z9HHSE2A99 Modular managed Industrial Switch
  • Hirschmann GRM20-ZZZZZZZZSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-ZZZZTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-TTTTTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-MMMMTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-MMMMMMMMSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRS1030-8T8ZSMMV9HHSE2S 8 x FE TX + 8 x FE SFP + 4 x FE/GE Combo + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1030-16T9SMMV9HHSE2S 16 x FE TX + 4 x FE/GE Combo + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1020-8T8ZSMMV9HHSE2S 8 x FE TX + 8 x FE SFP + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1020-16T9SMMV9HHSE2S 16 x FE TX + up to 8 x FE ports via additional media modules
  • GE UCECH1A UCSE Mark VIe Controller
  • GE IS420UCSEH2C UCSE Mark VIe Controller
  • GE IS220UCSBH4A UCSE Mark VIe Controller
  • GE IS220UCSBH3A UCSE Mark VIe controller module
  • GE IS220UCSBH1A UCSE Mark VIe controller module
  • GE IS420UCSEH2B UCSE Mark VIe controller module
  • GE IS420UCSEH2A UCSE Mark VIe controller module
  • Hirschmann Basic Switches - RSB20-0900VVM2SAABHH Ethernet/Fast Ethernet-Switch
  • Hirschmann BXP62-28TX-EECC-HV-3A-BP HiOS 3A BXP
  • Hirschmann BXP62-28TX-EECC-HV-2A-BP BXP HiOS 2A
  • Hirschmann BXP62-20TX-EECC-HV-3A-BP HiOS 3A
  • Hirschmann BXP62-20TX-EECC-HV-2A HiOS 2A BXP
  • Hirschmann BXP62-28TX-EECC-HV-3A HiOS 3A BXP
  • Hirschmann BXP62-28TX-EECC-HV-2A HiOS 2A BXP Switches
  • Hirschmann BXP62-20TX-EECC-HV-3A BXP Switches
  • Hirschmann BXP62-20TX-EECC-HV-2A-BP BXP Switches
  • Hirschmann RSB20-0900VVM2TAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900MMM2TAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900S2TTAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900M2TTAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0800S2S2TAABE Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0800M2M2TAAB Ethernet Switch EEC MM SC RSB20 Series
  • Hirschmann RSB20-0800T1T1TAAB Ethernet Switch EEC RSB20 Series
  • Hirschmann RSB20-0900VVM2SAAB Ethernet Switch 942014008 RSB20 Series
  • Hirschmann RS30-2402O6O6SDAE Ethernet Switch; Managed; Enhanced; 24xRJ45; 2x1Gig Fiber; 943434039
  • Hirschmann RSB20-0900MMM2SAAB Ethernet Switch 942014007
  • Hirschmann RSB20-0900S2TTSAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, SM SC, RSB20 Series
  • Hirschmann RSB20-0900M2TTSAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, MM SC, RSB20 Series
  • Hirschmann RSB20-0900ZZZ6SAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, RSB20 Series
  • Hirschmann RSB20-0800S2S2SAAB Ethernet Switch, Managed, 8 Port, 12 to 24 VDC, SM SC, RSB20 Series
  • Hirschmann RSB20-0800M2M2SAAB Ethernet Switch
  • Hirschmann RSB20-0800T1T1SAAB Ethernet Switch, Managed, 8 Port, 12 to 24 VDC, RSB20 Series
  • Hirschmann 4C4C4C4C999 16 RJ45/SFP Combo Ports (support 100 and 1000 Mbit/s SFP)
  • Hirschmann MAR1142 Full Gigabit Ethernet Switch with Ports on the rear, PoE
  • Hirschmann MAR1140 Full Gigabit Ethernet Switch with Ports on the rear
  • Hirschmann MAR1042 Full Gigabit Ethernet Switch with PoE
  • Hirschmann MAR1132 Gigabit Ethernet Uplink with Ports at the bcak and 4 Ports PoE
  • Hirschmann MAR1130 Gigabit Ethernet Uplink with Ports at the bcak
  • Hirschmann MAR1032 Gigabit Ethernet Uplink with 4 Ports PoE
  • Hirschmann MAR1122 Fast Ethernet Uplink with Ports at the back and 4 Ports PoE
  • Hirschmann MAR1120 Fast Ethernet Uplink with Ports at the back
  • Hirschmann MAR1022 Fast Ethernet Uplink with 4 Ports PoE
  • Hirschmann MACH 1040 Full Gigabit Rack Mount Switches
  • Hirschmann MAR1030 Ruggedized managed Ethernet Switches, 19" cabinet mount
  • Hirschmann MAR1020 Ruggedized managed Ethernet Switches, 19" cabinet mount
  • Hirschmann MAR1040-4C4C4C4C9999SM9HRHH Rack Mount Switches
  • Hirschmann MAR1040-4C4C4C4C9999SM9HPHH Rack Mount Switches
  • Hirschmann MAR1040-4C4C4C4C9999SMMHPHH Rack Mount Switches
  • Hirschmann MAR1030-4OTTTTTTTTTTTTTTTTTTTTTTTTFMMHPHH
  • Hirschmann MAR1020-99MMMMMMMMMMMMMMMMMMMMMMMMFMMHPHH
  • Hirschmann M-SFP-2.5-SM+/LC EEC SFP Fiberoptic 2.5 Gigabit Ethernet Transceiver SM
  • Hirschmann M-SFP-2.5-SM/LC EEC SFP Fiberoptic 2.5 Gigabit Ethernet Transceiver SM
  • Hirschmann M-SFP-2.5-SM-/LC EEC SFP Fiberoptic 2.5 Gigabit Ethernet Transceiver SM
  • Hirschmann M-SFP-2.5-MM/LC EEC SFP Fiberoptic 2.5 Gigabit Ethernet Transceiver MM
  • Beckhoff EL5152 | EtherCAT Terminal, 2-channel encoder interface, incremental
  • Beckhoff ELX5151-0090 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff ELX5151 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5151-0090 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5151-0021 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5151 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5131 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5122 | EtherCAT Terminal, 2-channel encoder interface, incremental
  • Beckhoff ED5112 | EtherCAT Terminal, 2-channel encoder interface, incremental
  • Beckhoff EL5112 | EtherCAT Terminal, 2-channel encoder interface, incremental, 5 V DC
  • Beckhoff EL5102 | EtherCAT Terminal, 2-channel encoder interface, incremental
  • Beckhoff EL5101-0090 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5101-0011 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5101-0010 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5101 | EtherCAT Terminal, 1-channel encoder interface, incremental, 5 V DC
  • Beckhoff EL5042 | EtherCAT Terminal, 2-channel encoder interface, BiSS® C
  • Beckhoff EL5032-0090 | EtherCAT Terminal, 2-channel encoder interface, EnDat® 2.2
  • Beckhoff EL5032 | EtherCAT Terminal, 2-channel encoder interface, EnDat® 2.2
  • Beckhoff EL5031-0011 | EtherCAT Terminal, 1-channel encoder interface, EnDat® 2.2
  • Beckhoff EL5021-0090 | EtherCAT Terminal, 1-channel encoder interface, SinCos
  • Beckhoff EL5021 | EtherCAT Terminal, 1-channel encoder interface, SinCos, 1 VPP
  • Beckhoff EL5001-0012 | EtherCAT Terminal, 1-channel encoder interface, SSI, simulation
  • Beckhoff ED5002 | EtherCAT Terminal, 2-channel encoder interface, SSI, push-in
  • Beckhoff EL5002 | EtherCAT Terminal, 2-channel encoder interface, SSI
  • Beckhoff EL5001-0090 | EtherCAT Terminal, 1-channel encoder interface, SSI, TwinSAFE SC
  • Beckhoff EL5001-0011 | EtherCAT Terminal, 1-channel encoder interface, SSI, monitor
  • Beckhoff EL5001 | EtherCAT Terminal, 1-channel encoder interface, SSI
  • Alfa Laval M Gear Gear Pumps
  • Alfa Laval ALP pump range
  • Alfa Laval three-screw pump
  • Alfa Laval DuraCirc Circumferential Piston Pump
  • Alfa Laval OS Twin Screw Pumps
  • Alfa Laval SX UltraPure Rotary lobe pumps
  • Alfa Laval SX Rotary lobe pumps
  • Alfa Laval SRU Rotary lobe pump
  • Alfa Laval OptiLobe Rotary lobe pumps
  • Alfa Laval MaxiLobe UltraPure Rotary lobe pumps
  • Alfa Laval MaxiLobe Rotary lobe pumps
  • Alfa Laval OptiLobe Rotary Lobe Pump Competitive Reliability
  • ABB GV C736 CE10 3BHB045647R0001 Resistive-Capacitive Voltage Sensor
  • Hirschmann 942 222-002 D4K-PSU-PANEL Blind panel for PSU slot
  • Hirschmann 942 222-001 D4K-LC-PANEL Blind panel for port module slot
  • Hirschmann 942 157-001 D4K-AIR DRAGON MACH4x00 fan unit, field-replaceable
  • Hirschmann 942 156-001 D4K-PSU-300W-HV Power Supply
  • Hirschmann 942 294-001 D4K-10TP-PoE Port Modules
  • Hirschmann 942 155-501 D4K-12SFP Port Modules
  • Hirschmann 942 155-001 D4K-12TP-RJ45 Port Modules
  • Hirschmann 942 153-003 – DRAGON MACH4500-80G+8X-L3A-MR Basic Unit
  • Hirschmann 942 153-002 – DRAGON MACH4500-80G+8X-L3A-UR Basic Unit
  • Hirschmann 942 153-001 – DRAGON MACH4500-80G+8X-L2A Basic Unit
  • Hirschmann 942 154-003 – DRAGON MACH4000-48G+4X-L3A-MR Basic Unit
  • Hirschmann 942 154-002 – DRAGON MACH4000-48G+4X-L3A-UR Basic Unit
  • Hirschmann 942 154-001 – DRAGON MACH4000-48G+4X-L2A Basic Unit
  • Hirschmann 942 318-003 – DRAGON MACH4000-52G-L3A-MR Basic Unit
  • Hirschmann 942 318-002 – DRAGON MACH4000-52G-L3A-UR Basic Unit