IBA ibaNet750-BM-D Distributed I/O System

the other devices within the cascade. It is allowed to mix ibaPADU-8. ibaPADU-8-O and

ibaNet750-BM-D devices within an optical link.

An ibaFOB-D input card is required on the PC side. If ibaNet750-BM-D is used as re

placement for the predecessor ibaNet750-BM, even older PC cards (ibaFOB-io, ibaFOB

4i and ibaFOB-4i-S) can act as receivers.

Additionally each station can simultaneously be used as output device (like ibaPADU-8

O). This is in particular necessary when terminals with set/reset function are used, e.g.

counter etc. For this purpose, an ibaFOB-D card with output(s) is required on the PC

side.

To add more functions, ibaNet750-BM-D can also be used with the ibaLink-SM-64-io,

ibaLink-SM-128V-i-2o or ibaLink-VME card. This allows to create simple I/O extensions

for the systems Siemens Simatic S5 115U, 135U, 155U, as well as Siemens MMC216

and VME buses.

System requirements

Hardware

 PC with at least:

 At least one free PCI/PCIe slot (PC) or ExpressCard slot (notebook)

 Min. 512 MB RAM

 4 GB free disk space for measured values

 At least one fiber optic card of type ibaFOB-D,

(Firmware version V2.00 build 176 (C6) or higher), e. g.

 ibaFOB-io-D/ibaFOB-io-Dexp

 ibaFOB-2io-D/ibaFOB-2io-Dexp

 ibaFOB-2i-D/ibaFOB-2i-Dexp  optional with extension module ibaFOB-4o-D*

 ibaFOB-4i-D/ibaFOB-4i-Dexp  optional with extension module ibaFOB-4o-D*

 ibaFOB-io-ExpressCard

 Double fiber optic patch cable for a bidirectional connection between

ibaNet750-BM-D and ibaPDA-PC (suitable FO patch cables are available at iba).

* The extension module is required for bidirectional connections, it is mandatory

with 32Mbit Flex, and optional with 32Mbit and 3Mbit.

Software

 ibaPDA version 7.3.0 or later

 ibaLogic-V4 version 4.2.5.464 or later (no 32Mbit Flex)

 ibaLogic-V5 (no 32Mbit Flex)

Firmware

 ibaNet750-BM-D ab Version 01.03.005