Honeywell X-NPMS Configurable Network Paging Station

• Easy  touch  screen  operation  with 7’’  TFT  LCD  screen

and  simple  user  interface.

• Optional  gooseneck  microphone  or  PTT  microphone.

• Built-in  loudspeaker  for  audio  monitoring  and  inter

communication  function.

• Configurable  keys  for  audio  task  delivery,  zoning  and

grouping.

The X-NPMS connects to the X-618 system, transmitting audio

and  control  signal  through the Ethernet.  It  is used  for  live

paging, audio task delivery ,  audio  monitoring  zones ,  and

intercommunication.

Features

FUNCTIONS

• Manual  emergency  broadcast

• Normal  broadcast  control

• Zoning  and  grouping  broadcast

• Monitoring  function

• Internal  communication

• Faults  monitoring

• Automatic record

• Quick  and  simple  broadcast

• Recording  audio  in  advance  and broadcasting

• Broadcasting  the  audio  file  of  U-disk

• Daily  record

INDICATORS

POWER indicator:  Show  power supply status,

green means normal .

RUNNING indicator: Show devices working

status, flashing green means normal.

FAULT indicator: Show faults of system.

If  there  is  a  fault, the  indicator will be  flashing

yellow. And when the fault  is confirmed, it  keeps

lighting yellow.

The  indicator  will  be  off  when  the  system  is

normal.

NETWORK  indicator:   Show  network status.

Yellow   means   network   connection  failure.

Flashing   yellow   means  network  has   been

connected  but the station  can’t communicate

with other device.

Green  means  normal.

MIC  WORKING  STATUS  indicator: show  the

working  status of microphone.

Yellow  means  a  fault  of  microphone.

Flashing   green  means  broadcasting  warning

tone.

Green  means  microphone  is   working.

The indicator is off  when  microphone is normal

and not  working.

TOUCH SCREEN

Users  can operate directly on the innovative  7-inch

color LCD touch screen without adding an extra key

module unit.With the touch screen, users can super-

vise  the  system  status,   select  broadcast   zones,

assign  zone  groups  or  other  broadcast   controls,

including setting playlists,  timing broadcastings  etc.

With   the   built-in   configuration   software,   zones

broadcast status or button functions can be configu-

red easily.

CONNECTIONS

X-618  system  can  connect with up to 250 X-NPMS

via  Ethernet.  X-NPMS   can  be   used   as  a  node

anywhere in the network. To  reduce wiring cost,  the

devices can be connected  into an  existing  network

provided that there is sufficient band width to reduce

wiring cost.

AUDIO TRANSMISSION

The  device  comes  with  a  detachable  gooseneck

microphone.  Users  can  change  different  types of

microphone   for   different   real-time   broadcasting

requirements.  The  received  audio  signal   will  be

digitalized to eliminate sound distortion during trans-

mission.

The built-in speaker  not only  can be  used for zone

monitoring but also full-duplex intercom with other X

NPMS in the network.

X-NPMS  supports  fail-safe  operation.  Even  when

the  connected  DCS  fails,  X-NPMS  is  still  able to

communicate  with  other  X-NPMS  and   broadcast

through other DCS  in th network.