Hirschmann Industrial ETHERNET Rail Switch RS20/RS22/RS30/RS32/RS40 Family

(SELV). Connect only SELV circuits with voltage restrictions according

to IEC 60950-1 or ES1 according to IEC/EN 62368-1 to the supply

voltage connections and to the signal contacts.

 Exclusively connect a supply voltage that corresponds to the type

plate of your device.

 Applies exclusively to RS20-..., RS30-..., RS40-... device variants:

For power supply via DC voltage: All following prerequisites are

fulfilled:

 There are fuses suitable for DC voltage in the positive conductors

of the supply lines, or the voltage sources are appropriately current

limited. Regarding the properties of this fuse: See “General

technical data” on page 64.

 The negative conductors of the voltage inputs are on ground

potential.

For power supply via AC voltage: All following prerequisites are

fulfilled:

 There are fuses in the supply lines, or the voltage sources are

appropriately current-limited. Regarding the properties of this fuse:

See “General technical data” on page 64.

 The power sources are electrically isolated from the ground

potential.

Description

You can choose from a wide range of variants. You have the option to set up

your device individually based on different criteria:

 Number of ports

 Transmission speed

 Media type

 Types of connectors

 Temperature range

 Certifications

 Software variant

The device is designed for the special requirements of industrial automation.

The device meets the relevant industry standards, provides very high

operational reliability, even under extreme conditions, and also long-term

reliability and flexibility.

The device allows you to set up switched Industrial Ethernet networks

according to standard IEEE 802.3.

The device works without a fan.

The voltage is supplied redundantly.

The following installation options are available:

 Mounting on the DIN rail

 mounting them on a wall (only RS22/RS32)

Depending on the device variant, you can choose various media to connect

terminal devices and other infrastructure components:

 Twisted pair cable

 Multimode F/O

 Singlemode F/O

The twisted pair ports support:

 Autocrossing

 Autonegotiation

 Autopolarity

There are convenient options for managing the device. Manage your devices

via:

 Web browser

 Telnet

 SSH

 HiDiscovery (software for putting the device into operation)

 Network management software (for example Industrial HiVision)

The Network Management Software Industrial HiVision provides you with

options for smooth configuration and monitoring. You find further

information on the Internet at the Hirschmann product pages:

http://www.hirschmann.com/en/QR/INET-Industrial-HiVision

 V.24 interface (locally on the device)

The ring redundancy concept allows the network to be reconfigured quickly

after a failure.

Product configuration data can be provided by:

 diagnosis displays

 Display of the operating parameters

 Label area for IP address

The device provides you with a large range of functions, which the manuals

for the operating software inform you about. You can download these

manuals as PDF files from the Internet at: https://www.doc.hirschmann.com

The Hirschmann network components help you ensure continuous

communication across all levels of the company.

Description of the device variants

The devices differ with regard to the range of software functions, the number

of interfaces, and the media type for connecting segments.

The table below shows three port categories for each product variant: uplink

ports, PoE ports and other ports. The table also shows for each product

category the number of ports you can select, and the type of ports. In the

column for the port type, the abbreviations F/O (optical fiber) and TP (twisted

pair) indicate the media type, while the abbreviations DSC, ST, SFP and

RJ45 indicate the socket type.