Woodward Power Management Accessories

Enhancing functionality and supporting specialized requirements, easYgen-3000XTaccessories ensure seamless integration into complex power systems.

Modules

Remote Annunciator – easYlite-200: Provides real time visualization and audible alerts, providing information about system status, malfunctions etc., without needing to go to the main control panel.

Digital I/O Expansion Module – IKD: 8 discrete inputs, 8 relay outputs FORM C via CAN bus communication

Digital Input Expansion Module: 16 discrete inputs, CAN bus communication, very fast CAN ID configuration via dip-switches

Digital Output Expansion Module: 16 discrete inputs, CAN bus communication, very fast CAN ID configuration via dip-switches

Group Controller: Allows connection between 496 gensets / power generation units and 1200 breakers for complex applications and large power generation fleets connected together

Software Tools

Configuration Software Toolkit:

Basic Software License: Included free of charge in the Toolkit download, and enables users to configure, monitor & troubleshoot on easYgen, LS5 and LS6 Breaker Controllers, MFR-300 and other controllers

Modbus Master Mapper:

Modbus / TCP customization to read and/or write data

Flashing of the generated customized Modbus / TCP via Toolkit into the controllers easYgen3000XT and LS-6

Mappable address points for read/write tasks to exchange information with Power Electronics (eg. PV Inverters), protection relays, kW Transducers

Data Telegram Mapper: Simplify your retrofit projects, customize your Modbus TCP protocol

Configure the Modbus data protocols

Up to 300 addresses

Upload file into the easYgen3000XT or LS-6XT (*.map file)

Documentation of the created telegram (HTML file)

Emulation of Load Dependent Start Stop: Improve fuel efficiency and reliability, Work through what-if scenarios for your genset fleet

Monitor that all or several of the power generating assets does not approach maintenance cycle simultaneously

Maintain sufficient reserve power on the bus in anticipation of a large consumer and that the reserve power automatically falls back after the large consumer breaker is closed

Start and stop the gensets according to max/min loading criteria, the later especially to help burn car-bon deposits on engines cylinder head

Switch ON and OFF the genset at every pre-defined run hours to equalize the total run hours

Determine the optimum combination of gensets when the fleet consists of mixed size gensets

HMI Language Customization:

Add / change HMI display language of the easYgen3000XT or remote panel XT display

Use MS Excel to modify your language

Flashing into the devices via ToolKit

Simulation of the HMI to check the translation on-the-fly

Re-use previously translated texts

Interconnect Mapper:

Unlock the full potential of your easYgen with Ethernet communication capabilities

Seamlessly send and receive data between easYgen devices with InterConnectMapper

Create setup files for EG3000XT and related devices to enable communication via UDP messages

Define who sends which data at which rate and subscribe to data from other devices

Utilize up to 99 analog values and 99 Boolean values for receiving data from other devices

Send all AnalogManager and LogicsManager values, as well as defined indices and constants

Group Boolean flags into 16-bit values for efficient data transfer

Easily upload map files and SCP files via Woodward Toolkit or ftp access

Gateway Accessories

Remote Access Gateway:

Allows users to start or stop generators remotely

Gather operational data such as energy consumption, operating hours, temperatures, etc. in the cloud and analyze these trends to reduce maintenance costs

Receive alarms via email or SMS when the generator reaches certain thresholds

Automatically generate email reports

Connect the system to your own servers or applications

Fiber Optic Converter: Up to 40km communication range extension via Fibre Optic System, create electromagnetic ruggedness

Profibus Converter: ESEPRO device – addresses up to 8 easYgen or LS Series controllers, direct mapping of data into process I/O

Ethernet Converter: for the old easYgen3000 – non XT, convert CAN to Ethernet.