Power Engineering 
K-JIANG
NameDescriptionContent
Current Location:

Hitachi 500NMD01 Compact Modem

From:Hitachi | author:Mr.Chen | Time :2024-07-25 | 1246 view: | 🔊 Click to read aloud ❚❚ ▶ | Share:

- Integrated Managed Layer 2 Switch

- 24... 60 VDC supply voltage

- 4x 10/100 BaseT (RJ45. auto-negotiation)

- 1x SHDSL port for copper lines

- Redundant topology via Spanning Tree Protocol (STP/RSTP/MSTP)

- 1x RS-232/ RS-485 interface for tunneling of serial protocols

Applications

The DIN-rail mountable 500NMD01 is a managed plug-and-play Layer 2 switch that offers

- 4 Fast Ethernet auto-negotiating RJ45 ports with automatic MDI/X (automatic cross detection and correction)

- 1 2-wire SHDSL port for dedicated copper cable

- 1 RS-232/ RS-485 interface for tunneling of serial protocols

The switch provides a redundant topology via Spanning Tree Protocol (STP/ RSTP/ MSTP). It supports VLAN framing and serial data tunnelling.

Ethernet can be distributed within the station via the switch's four RJ45 ports.

The SHDSL port can be used for interstation interconnections up to a maximum distance of 25 km (0.8 mm diameter copper cable).

The SHDSL interface connects to any EDS500 SHDSL-compatible device, including the 560NMS24 and 560NMS34. as well as any EFM-based SHDSL device.

Features

For documentation purposes, the Ethernet ports are labelled 1 to 4 and there are no specific uplink ports.

All ports are functionally identical, and the SHDSL port is connected via a pluggable threaded connector.

The link and speed status of each Ethernet port and SHDSL port is indicated by status indicators (see ‘Connectors and Indicators’).

The switch learns the Ethernet address by analysing incoming frames and stores it in a lookup table (up to 2048 entries).

used to forward frames only to the correct port. If it is a broadcast or multicast, or if the destination address is not found in the lookup table, the

then the received frame is forwarded to all ports other than the receiving port. If an incoming frame with a specific source address does not refresh the entry in the lookup table, the

entry will age out in up to 304 seconds (by default, this value is configurable).

For IEEE 802.1Q VLAN frames, the switch can be configured in VLAN or transparent mode. In transparent mode, the switch does not change any frames or frame TAGs;

In VLAN mode, the switch can be configured to support multiple applications, such as trunks or access ports.

The switch can support quality of service if it uses IEEE 802.1p-compliant frame formats.

The switch can divide frames into up to four queues, which can be configured as priority-based queues or weighted fair queues.

The 500NMD01 uses a wide-range power supply that operates from 24 to 60 V. The switch can be configured to operate on a wide-range power supply.

The switch itself, the Ethernet ports, as well as the SHDSL connection, the RS-232 interface, and the Extended Bus Interface (Ext) are hot-swappable.

Topology

The 500NMD01 offers a total of five ports for use with end devices, switches, bridges, hubs and routers.

The switches can be easily constructed in star, ring, or line topologies.

Redundant topologies can be automatically detected and processed via Rapid Spanning Tree Protocol (RSTP) or Multiple Spanning Tree Protocol (MSTP).

This is fully backward compatible with the widely used Spanning Tree Protocol (STP).

Management and Configuration

Management and configuration of the 500NMD01 can be accomplished via Telnet, Secure Shell (SSH), SNMP, RS-232. or Web interface.

All methods can be used to read or write device parameters.

In addition, the interface and alarm status of the device can be monitored via IEC 60870-5-101 or -104.

Existing configurations can be saved and restored. The configuration can also be stored in an external configuration stick (500NMA01).

This makes it simple to swap devices without trained personnel.

By default, the 500NMD01 switch is configured with an IP address of 10.0.0.2. a subnet mask of 255.0.0.0. and a gateway of 10.0.0.1.

Connections for configuration purposes can be accepted over any interface. All Ethernet ports are in the administrative state by default.

The RS-232 interface is preconfigured for a baud rate of 57600. 8 data bits, no parity, and 1 stop bit (57600.8N1).

Any terminal software (e.g. HyperTerminal) can access the command line interpreter configured through this interface.

  • Basler Electric BE32965001 Transformer With Cissell TU12874 Timer Board Kit
  • Basler Electric D90 96801 100 PCB CARD
  • BASLER BE1-81 / BE1-81-T1E-E1C-A0N1F / 9106400 UNDERFREQUENCY SS RELAY DAMAGED
  • Basler Electric 3280024-14 AGP3600-T1-D24 12.1" FLEX Network HMI Touch
  • Basler Electric SR4A2B10B1A Static Voltage Regulator
  • Basler Electric SR8A2B05B3A Static Voltage Regulator
  • Basler Electric BE34062001 G18 Transformer N And P Voltage F840101
  • Basler 9269101107 Voltage Regulator Board For Basler DECS-400
  • Basler Electric SR32A-2B13B3E STATIC VOLTAGE REGULATOR
  • DECS100-B15 Basler Automatic Voltage Regulator For Basler Electric Generator
  • Basler Electric SR8A-2B15B3A STATIC VOLTAGE REGULATOR SR8A2B15B3A
  • Basler Electric SR4A-2B16B3A STATIC VOLTAGE REGULATOR
  • Basler Electric SR4A-2B16B3E Static Voltage Regulator
  • Basler Electric SR8A2B06B3A STATIC VOLTAGE REGULATOR
  • Hirschmann (Belden)MACH1000, RSPx, RSR and GREYHOUND Power Cord - Schuko 2,5m
  • Hirschmann (Belden)PC150/72V/48V-IP67 DC/DC converter with 48 V power output
  • Hirschmann (Belden)RPS 260/PoE EEC 48 - 56 V DC rail power supply unit
  • Hirschmann (Belden)RPSS120-24V EEC 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS480-48V EEC 48 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS240-48V EEC 48 V DC DIN rail power supply unit
  • Hirschmann (Belden)PC150/110V/54V DC/DC converter with 54 V power output
  • Hirschmann (Belden)RPS 80 EEC 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS75-24V EEC 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPS 15, Rail Power Supply 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS240-48V EEC 48 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPS 120 EEC 24 V DC DIN rail power supply unit
  • GE Energy MVDL1000-47931101 Power Conversion Module 690V 1000A
  • GE Energy MVDL8 00-479 3110 1-A Power Conversion Delta Module for MV3000 Drive
  • METSO D201925 ACN CS Controller Module DCS DNA System Processor
  • Hirschmann GMM20-MMMMMMMMSZ9HHS9 GREYHOUND1042 Fast Ethernet media module
  • Hirschmann GRS1042-6T6ZTLL12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZTLL12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-6T6ZTHH12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZTHH12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZSHH00Z9HHSE2A99 Modular managed Industrial Switch
  • Hirschmann GRS1042-6T6ZSHH00Z9HHSE2A99 Modular managed Industrial Switch
  • Hirschmann GRM20-ZZZZZZZZSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-ZZZZTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-TTTTTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-MMMMTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-MMMMMMMMSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRS1030-8T8ZSMMV9HHSE2S 8 x FE TX + 8 x FE SFP + 4 x FE/GE Combo + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1030-16T9SMMV9HHSE2S 16 x FE TX + 4 x FE/GE Combo + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1020-8T8ZSMMV9HHSE2S 8 x FE TX + 8 x FE SFP + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1020-16T9SMMV9HHSE2S 16 x FE TX + up to 8 x FE ports via additional media modules
  • GE UCECH1A UCSE Mark VIe Controller
  • GE IS420UCSEH2C UCSE Mark VIe Controller
  • GE IS220UCSBH4A UCSE Mark VIe Controller
  • GE IS220UCSBH3A UCSE Mark VIe controller module
  • GE IS220UCSBH1A UCSE Mark VIe controller module
  • GE IS420UCSEH2B UCSE Mark VIe controller module
  • GE IS420UCSEH2A UCSE Mark VIe controller module
  • Hirschmann Basic Switches - RSB20-0900VVM2SAABHH Ethernet/Fast Ethernet-Switch
  • Hirschmann BXP62-28TX-EECC-HV-3A-BP HiOS 3A BXP
  • Hirschmann BXP62-28TX-EECC-HV-2A-BP BXP HiOS 2A
  • Hirschmann BXP62-20TX-EECC-HV-3A-BP HiOS 3A
  • Hirschmann BXP62-20TX-EECC-HV-2A HiOS 2A BXP
  • Hirschmann BXP62-28TX-EECC-HV-3A HiOS 3A BXP
  • Hirschmann BXP62-28TX-EECC-HV-2A HiOS 2A BXP Switches
  • Hirschmann BXP62-20TX-EECC-HV-3A BXP Switches
  • Hirschmann BXP62-20TX-EECC-HV-2A-BP BXP Switches
  • Hirschmann RSB20-0900VVM2TAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900MMM2TAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900S2TTAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900M2TTAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0800S2S2TAABE Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0800M2M2TAAB Ethernet Switch EEC MM SC RSB20 Series
  • Hirschmann RSB20-0800T1T1TAAB Ethernet Switch EEC RSB20 Series
  • Hirschmann RSB20-0900VVM2SAAB Ethernet Switch 942014008 RSB20 Series
  • Hirschmann RS30-2402O6O6SDAE Ethernet Switch; Managed; Enhanced; 24xRJ45; 2x1Gig Fiber; 943434039
  • Hirschmann RSB20-0900MMM2SAAB Ethernet Switch 942014007
  • Hirschmann RSB20-0900S2TTSAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, SM SC, RSB20 Series
  • Hirschmann RSB20-0900M2TTSAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, MM SC, RSB20 Series
  • Hirschmann RSB20-0900ZZZ6SAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, RSB20 Series
  • Hirschmann RSB20-0800S2S2SAAB Ethernet Switch, Managed, 8 Port, 12 to 24 VDC, SM SC, RSB20 Series
  • Hirschmann RSB20-0800M2M2SAAB Ethernet Switch
  • Hirschmann RSB20-0800T1T1SAAB Ethernet Switch, Managed, 8 Port, 12 to 24 VDC, RSB20 Series
  • Hirschmann 4C4C4C4C999 16 RJ45/SFP Combo Ports (support 100 and 1000 Mbit/s SFP)
  • Hirschmann MAR1142 Full Gigabit Ethernet Switch with Ports on the rear, PoE
  • Hirschmann MAR1140 Full Gigabit Ethernet Switch with Ports on the rear
  • Hirschmann MAR1042 Full Gigabit Ethernet Switch with PoE
  • Hirschmann MAR1132 Gigabit Ethernet Uplink with Ports at the bcak and 4 Ports PoE
  • Hirschmann MAR1130 Gigabit Ethernet Uplink with Ports at the bcak
  • Hirschmann MAR1032 Gigabit Ethernet Uplink with 4 Ports PoE
  • Hirschmann MAR1122 Fast Ethernet Uplink with Ports at the back and 4 Ports PoE
  • Hirschmann MAR1120 Fast Ethernet Uplink with Ports at the back
  • Hirschmann MAR1022 Fast Ethernet Uplink with 4 Ports PoE
  • Hirschmann MACH 1040 Full Gigabit Rack Mount Switches
  • Hirschmann MAR1030 Ruggedized managed Ethernet Switches, 19" cabinet mount
  • Hirschmann MAR1020 Ruggedized managed Ethernet Switches, 19" cabinet mount
  • Hirschmann MAR1040-4C4C4C4C9999SM9HRHH Rack Mount Switches
  • Hirschmann MAR1040-4C4C4C4C9999SM9HPHH Rack Mount Switches
  • Hirschmann MAR1040-4C4C4C4C9999SMMHPHH Rack Mount Switches
  • Hirschmann MAR1030-4OTTTTTTTTTTTTTTTTTTTTTTTTFMMHPHH
  • Hirschmann MAR1020-99MMMMMMMMMMMMMMMMMMMMMMMMFMMHPHH
  • Hirschmann M-SFP-2.5-SM+/LC EEC SFP Fiberoptic 2.5 Gigabit Ethernet Transceiver SM
  • Hirschmann M-SFP-2.5-SM/LC EEC SFP Fiberoptic 2.5 Gigabit Ethernet Transceiver SM
  • Hirschmann M-SFP-2.5-SM-/LC EEC SFP Fiberoptic 2.5 Gigabit Ethernet Transceiver SM
  • Hirschmann M-SFP-2.5-MM/LC EEC SFP Fiberoptic 2.5 Gigabit Ethernet Transceiver MM
  • Beckhoff EL5152 | EtherCAT Terminal, 2-channel encoder interface, incremental
  • Beckhoff ELX5151-0090 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff ELX5151 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5151-0090 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5151-0021 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5151 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5131 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5122 | EtherCAT Terminal, 2-channel encoder interface, incremental
  • Beckhoff ED5112 | EtherCAT Terminal, 2-channel encoder interface, incremental
  • Beckhoff EL5112 | EtherCAT Terminal, 2-channel encoder interface, incremental, 5 V DC
  • Beckhoff EL5102 | EtherCAT Terminal, 2-channel encoder interface, incremental
  • Beckhoff EL5101-0090 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5101-0011 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5101-0010 | EtherCAT Terminal, 1-channel encoder interface, incremental
  • Beckhoff EL5101 | EtherCAT Terminal, 1-channel encoder interface, incremental, 5 V DC
  • Beckhoff EL5042 | EtherCAT Terminal, 2-channel encoder interface, BiSS® C
  • Beckhoff EL5032-0090 | EtherCAT Terminal, 2-channel encoder interface, EnDat® 2.2
  • Beckhoff EL5032 | EtherCAT Terminal, 2-channel encoder interface, EnDat® 2.2
  • Beckhoff EL5031-0011 | EtherCAT Terminal, 1-channel encoder interface, EnDat® 2.2
  • Beckhoff EL5021-0090 | EtherCAT Terminal, 1-channel encoder interface, SinCos
  • Beckhoff EL5021 | EtherCAT Terminal, 1-channel encoder interface, SinCos, 1 VPP
  • Beckhoff EL5001-0012 | EtherCAT Terminal, 1-channel encoder interface, SSI, simulation
  • Beckhoff ED5002 | EtherCAT Terminal, 2-channel encoder interface, SSI, push-in
  • Beckhoff EL5002 | EtherCAT Terminal, 2-channel encoder interface, SSI
  • Beckhoff EL5001-0090 | EtherCAT Terminal, 1-channel encoder interface, SSI, TwinSAFE SC
  • Beckhoff EL5001-0011 | EtherCAT Terminal, 1-channel encoder interface, SSI, monitor
  • Beckhoff EL5001 | EtherCAT Terminal, 1-channel encoder interface, SSI
  • Alfa Laval M Gear Gear Pumps
  • Alfa Laval ALP pump range