GE Fanuc IC694MDL930 Relay Output Module

3. Does the IC694MDL930 support the 90-30 series PLC family?

No. This module does not support the 90-30 series. This module does not support the 90-30 series.

1. How many relay output channels does the IC694MDL930 have?

The IC694MDL930 has eight (8) isolated relay channels.

2. Does the IC694MDL930 support mounting to 90-30 series racks?

Yes, the IC694MDL930 supports mounting to 90-30 series racks. The IC694MDL930 can be mounted from an RX90i chassis to a 30-3 series chassis.

3. What is the contact form for the IC694MDL930?

The IC694MDL930 has normally open (N.O.) or A-type contacts.

Technical Description of IC694MDL930

The IC694MDL930 is a PACSystem RX3i discrete output module formerly manufactured by GE Fanuc, now part of Emerson Automation.

The module has eight (8) independently isolated normally open (N.O.) contacts. Each contact output can operate from 5-30 VDC.

24 VDC; 5 - 250 VAC at 47 to 63 Hz with a nominal input voltage of 120/240 VAC.

Each channel is designed for resistive loads up to 4 amps per output; 2 amps pilot duty cycle per output; 20 amps maximum per module for UL mounting.

The module has a current draw of 6mA with all outputs turned on by the 5 V bus on the backplane and 24mA with all outputs turned on by the relay 70V bus on the backplane.