GE IC693CHS398 5-Slot Expansion Baseboards

Product Description

The IC693CHS397 is a 5-slot expansion baseboard for the 90-30 Series Programmable Logic Controller (PLC) platform.

Formerly manufactured by GE Fanuc and now part of Emerson Automation, this baseboard has five (5) main I/O slots,

one (1) power slot, and one (1) expansion port. The module supports the installation of standard 90-30 series I/O modules and specialized modules.

It can be mounted directly to the panel using the supplied mounting tabs.

About the IC693CHS398

The IC693CHS398 is an expansion backplane for the 90-30 Series PLCs, formerly manufactured by GE Fanuc and now part of Emerson Automation.

The module can be paired with a CPU baseboard and connected through the expansion port on the CPU baseboard.

With the IC693CHS398. the central processing unit (CPU) module can control additional I/O modules.

The number of expansion boards (e.g., IC693CHS398) allowed per system varies depending on the type of CPU used.

Specifically, up to four expansion boards can be used simultaneously for any of the CPUs 331. 340. and 341. and up to four expansion boards can be used simultaneously for CPU 350 and above.

The IC693CHS398 is equipped with five (5) I/O slots for option modules.

These slots are uniquely sized to prevent improper module installation. This backplane requires a dedicated power supply module to operate.

The power supply is installed through a dedicated power supply slot located on the left side of the hardware. There is also an expansion baseboard port on the far right side of the hardware for connecting additional expansion baseboards.

The IC693CHS398 measures 10.43 x 5.12 x 5.59 inches (W x H x D) and has an internal power requirement of 170 mA at 5VDC.

To ensure continuous communication, the expansion system allows up to 50 feet or 15 meters of interconnecting cable.

This hardware does not support the installation of PCMs, ADCs, Bus Expansion Modules (BEMs), and CMM311 modules.

The IC693CHS398 baseboard, manufactured by GE Fanuc and part of the 90-30 series, is an expansion baseboard.

It can be used as part of a large industrial control system.The IC693CHS398 Expansion Baseboard must always be connected to a CPU baseboard in the PLC, but can only be connected to a total of one CPU baseboard.

However, it is possible to connect multiple expansion baseboards at the same time.

The total number of expansion boards that can be connected to the GE Fanuc 90-30 Series IC693CHS398 Expansion Board at one time depends on the type of CPU.

CPUs 331. 340. and 341 can support up to four expansion boards at the same time, while CPUs numbered 350 or higher can support up to seven expansion boards at the same time.

For safety, the IC693CHS398 expansion board and all other expansion boards in the system must be installed on a common ground.

The IC693CHS398 Expansion Board has five slots for I/O modules and connects to other boards via a 25-pin D-type female I/O expansion connector on its far right edge.

IC693CHS398 Frequently Asked Questions

1. How many I/O slots are available in the IC693CHS398?

The IC693CHS398 has five (5) I/O slots.

2. What is the load current of the IC693CHS398?

The load current of the IC693CHS398 is 170 mA @ 5VDC. 3.

3. What are the compatible CPUs that can use the IC693CHS398 board?

Compatible CPUs are CPU 331. 340. 341. 350 or higher.

1. How many I/O slots are available on the IC693CHS398?

The IC693CHS398 has 5 I/O slots. 2.

2. What is the total cable distance when connecting the expansion board?

The maximum total cable distance allowed is 50 feet or 15 meters. 3.

3. Is a power supply required?

Yes, a power supply module is required to operate the IC693CHS398.

Technical Description of the IC693CHS398

The IC693CHS398 is a 90-30 series component manufactured by GE Fanuc. It is a 5-slot expansion board.

This board is CPU related and is specifically compatible with CPUs 331. 340. 341. and CPU 350. The expansion cable used to connect this board must not be more than 50 feet (15 meters) from the CPU.

Related Product Recommendations.

1769-OF8C Analog Output Module

1769-PB4 Power Module

BSFC-01C Charge Control Board SP Kit Gate Driver Boards

DeltaV™ VerticalPlus Input/Output Subsystem Carrier

MVME050 System Controller Module

A6500-UM Universal Measurement Card

C150/0000/STD DIN Universal Process Indicator

A6500-UM General Purpose Measurement Card

MVME2300 Series VME Boards Processor Modules