Watlow The EZ-ZONE RM controller simplifies thermal system management

The EZ-ZONE RM controller simplifies thermal system

management. The EZ-ZONE RM controller family is

comprised of six module types: An integrated on-off or

PID control, monitoring and over/under temperature limit

module, a high-density on-off or PID control module,

a high-density limit only module, an input/output (I/O)

expansion module, a high-density monitor/scanner

module and a data logging and field communications

access module. A system is configured by connecting

any combination of module types to address specific

application needs. The EZ-ZONE RM is extremely flexible

and scalable allowing mixing and matching of I/O to

configure one to 152 control loops and up to 256

monitor points.

Now Watlow’s EZ-ZONE RM is available through

Watlow SELECT®, a program that enables you to quickly

identify, configure and receive your thermal products

faster and easier than ever before. 

Optional integrated controller functions can be

combined or ordered in different quantities:

• PID control loops

• Over/under temperature limit control loops

• 10 and 15 ampere power output/heater driver options

• On-board data logging

• Current measurement input

• Sequencer start up and control function

• Programmable timer and counter functions

• Programmable math and logic options

• Multiple communication protocol options

• Mobile configuration with removable secure digital (SD)

flash card

Benefits of using an integrated controller solution:

• Reduces wiring time and termination complexity

compared with connecting multiple discrete products

• Improves system reliability

• Reduces termination and installation cost

• Eliminates compatibility issues often encountered with

using various discrete components and brands

• Reduces troubleshooting time and downtime costs

because the system can specifically identify any

problems with a sensor, controller, solid state relay

(SSR) power output or heater load

• Complete thermal solution saves engineering

time and labor costs while shortening project

schedules

Features and Benefits

Multiple inputs; from one to 152 PID loops of

control or monitor up to 256 analog inputs

• Mix and match I/O to fit any application; from one

input with two outputs to 152 analog inputs with

152 outputs, or monitor up to as many as 256 analog

inputs all in one system

• Reduces cost because only required loops are

purchased

• Allows a common controller platform across many

design applications as both loops and outputs can

be ordered in single increments

Advanced PID control algorithm

• Offers TRU-TUNE®+ adaptive control to provide tighter

control for demanding applications

• Enables auto-tune for fast, efficient start-up

Communication capabilities

• Provides a range of protocol options including

universal serial bus (USB) device port, Modbus® RTU,

EtherNet/IP™, Modbus® TCP, DeviceNet™ and

PROFIBUS

USB port

• Provides data log retrieval

SPLIT-RAIL control

• Allows modules mounted in separate high-voltage

and low-voltage cabinets to function as an integrated

system

• Minimizes the length and cost of wire runs and

improves system reliability by locating inputs closer to

sensors and outputs closer to loads

AUTO CLONE

• Reduces time and configuration complexity by

automatically building a new module with the same

parameter settings as the replaced module

SENSOR GUARD

• Prevents unplanned process shutdowns and product

loss by switching to a backup sensor if the primary

sensor fails

EZ-ZONE RM

Additional Key Functions

• Configuration communication port (standard bus)

• Removable modules and connectors

• Ring lug and front-screw terminal options

• Profile ramp soak with 400 total steps

• Retransmit and remote set point input virtually inside

controller eliminating costs for input/output hardware

• User configuration settings can be stored and recalled

• Thermistor input

• Elevated operating range of 0 to 149°F (-18 to 65°C)

• UL® listed, CSA, CE, RoHS, W.E.E.E., FM,

SEMI F47-0200, Class 1, Div. 2 rating on selected

models

Common Specifications (Applies to all models)

Line Voltage/Power

• 20.4 to 30.8VAC/VDC, 50/60Hz ±5%

• Any external power supply used should comply with a

Class 2 or SELV rating (see specific module

specification listing for max. VA power consumption)

• Data retention upon power failure via non-volatile

memory

• Compliant with Semi F47-0200, Figure R1-1 voltage

sag requirements

Environment

• 0 to 149°F (-18 to 65°C) operating temperature

• -40 to 185°F (-40 to 85°C) storage temperature

• 0 to 90% RH, non-condensing

Functional Operating Range for RMC, RMH, RML

and RMS

Type J: -346 to 2192°F (-210 to 1200°C)

Type K: -454 to 2500°F (-270 to 1371°C)

Type T: -454 to 750°F (-270 to 400°C)

Type E: -454 to 1832°F (-270 to 1000°C)

Type N: -454 to 2372°F (-270 to 1300°C)

Type C: 32 to 4200°F (0 to 2315°C)

Type D: 32 to 4200°F (0 to 2315°C)

Type F: 32 to 2449°F (0 to 1343°C)

Type R: -58 to 3214°F (-50 to 1767°C)

Type S: -58 to 3214°F (-50 to 1767°C)

Type B: 32 to 3300°F (0 to 1816°C)

RTD (DIN): -328 to 1472°F (-200 to 800°C)

Process: -1999 to 9999 units